Telefon:
+49 (0)241 95 163 153
Fax:
+49 (0)241 95 163 155
E-Mail:
orders@antikoerper-online.de

ERK2 ELISA Kit

MAPK1 Reaktivität: Ratte Colorimetric Sandwich ELISA 0.15 ng/mL - 10 ng/mL Plasma, Serum, Tissue Homogenate
Produktnummer ABIN431451
  • Target Alle ERK2 (MAPK1) ELISA Kits anzeigen
    ERK2 (MAPK1) (Mitogen-Activated Protein Kinase 1 (MAPK1))
    Reaktivität
    • 6
    • 6
    • 6
    • 2
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    Ratte
    Nachweismethode
    Colorimetric
    Methodentyp
    Sandwich ELISA
    Detektionsbereich
    0.15 ng/mL - 10 ng/mL
    Untere Nachweisgrenze
    0.15 ng/mL
    Applikation
    ELISA
    Proben
    Plasma, Serum, Tissue Homogenate
    Analytische Methode
    Quantitative
    Spezifität

    This assay has high sensitivity and excellent specificity for detection of Extracellular Signal Regulated Kinase 2 (ERK2).
    No significant cross-reactivity or interference between Extracellular Signal Regulated Kinase 2 (ERK2) and analogues was observed.

    Kreuzreaktivität (Details)
    No significant cross-reactivity or interference between Extracellular Signal Regulated Kinase 2 (ERK2) and analogues was observed.
    Sensitivität
    0.055 ng/mL
    Bestandteile
    • Pre-coated, ready to use 96-well strip plate, flat buttom
    • Plate sealer for 96 wells
    • Reference Standard
    • Standard Diluent
    • Detection Reagent A
    • Detection Reagent B
    • Assay Diluent A
    • Assay Diluent B
    • Reagent Diluent (if Detection Reagent is lyophilized)
    • TMB Substrate
    • Stop Solution
    • Wash Buffer (30 x concentrate)
    • Instruction manual
    Featured
    Zu unserem meistverkauften MAPK1 ELISA Kit
    Top Product
    Discover our top product MAPK1 ELISA Kit
  • Applikationshinweise
    • Limited by the current condition and scientific technology, we cannot completely conduct the comprehensive identification and analysis on the raw material provided by suppliers. So there might be some qualitative and technical risks to use the kit.
    • The final experimental results will be closely related to validity of the products, operation skills of the end users and the experimental environments. Please make sure that sufficient samples are available.
    • Kits from different batches may be a little different in detection range, sensitivity and color developing time.
    • Do not mix or substitute reagents from one kit lot to another. Use only the reagents supplied by manufacturer.
    • Protect all reagents from strong light during storage and incubation. All the bottle caps of reagents should be covered tightly to prevent the evaporation and contamination of microorganism.
    • There may be some foggy substance in the wells when the plate is opened at the first time. It will not have any effect on the final assay results. Do not remove microtiter plate from the storage bag until needed.
    • Wrong operations during the reagents preparation and loading, as well as incorrect parameter setting for the plate reader may lead to incorrect results. A microplate plate reader with a bandwidth of 10nm or less and an optical density range of 0-3 O.D. or greater at 450 ± 10nm wavelength is acceptable for use in absorbance measurement. Please read the instruction carefully and adjust the instrument prior to the experiment.
    • Even the same operator might get different results in two separate experiments. In order to get better reproducible results, the operation of every step in the assay should be controlled. Furthermore, a preliminary experiment before assay for each batch is recommended.
    • Each kit has been strictly passed Q.C test. However, results from end users might be inconsistent with our in-house data due to some unexpected transportation conditions or different lab equipments. Intra-assay variance among kits from different batches might arise from above factors, too.
    • Kits from different manufacturers for the same item might produce different results, since we have not compared our products with other manufacturers.
    Kommentare

    Information on standard material:
    The standard might be recombinant protein or natural protein, that will depend on the specific kit. Moreover, the expression system is E.coli or yeast or mammal cell. There is 0.05% proclin 300 in the standard as preservative.

    Information on reagents:
    The stop solution used in the kit is sulfuric acid with concentration of 1 mol/L. And the wash solution is TBS. The standard diluent contains 0.02 % sodium azide, assay diluent A and assay diluent B contain 0.01% sodium azide. Some kits can contain is BSA in them.

    Information on antibodies:
    The provided antibodies and their host vary in different kits.

    Probenmenge
    100 μL
    Testdauer
    3 h
    Plattentyp
    Pre-coated
    Protokoll
    The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Extracellular Signal Regulated Kinase 2 (ERK2). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Extracellular Signal Regulated Kinase 2 (ERK2). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Extracellular Signal Regulated Kinase 2 (ERK2), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Extracellular Signal Regulated Kinase 2 (ERK2) in the samples is then determined by comparing the O.D. of the samples to the standard curve.
    Aufbereitung der Reagenzien
    1. Bring all kit components and samples to room temperature (18-25 °C) before use. If the kit will not be used up in one time, please only take out strips and reagents for present experiment, and leave the remaining strips and reagents in required condition.
    2. Standard - Reconstitute the Standard with 1.0 mL of Standard Diluent, keep for 10 minutes at room temperature, shake gently (not to foam). The concentration of the standard in the stock solution is 20 ng/mL. Firstly dilute the stock solution to 10 ng/mL and the diluted standard serves as the highest standard (10 ng/mL). Then prepare 7 tubes containing 0.5 mL Standard Diluent and use the diluted standard to produce a double dilution series. Mix each tube thoroughly before the next transfer. Set up 7 points of diluted standard such as 10 ng/mL, 5 ng/mL, 2.5 ng/mL, 1.25 ng/mL, 0.625 ng/mL, 0.312 ng/mL, 0.156 ng/mL, and the last microcentrifuge tube with Standard Diluent is the blank as 0 ng/mL.
    3. Detection Reagent A and Detection Reagent B - If lyophilized reconstitute the Detection Reagent A with 150μL of Reagent Diluent, keep for 10 minutes at room temperature, shake gently (not to foam). Briefly spin or centrifuge the stock Detection A and Detection B before use. Dilute them to the working concentration 100-fold with Assay Diluent A and B, respectively.
    4. Wash Solution - Dilute 20 mL of Wash Solution concentrate (30x) with 580 mL of deionized or distilled water to prepare 600 mL of Wash Solution (1x).
    5. TMB substrate - Aspirate the needed dosage of the solution with sterilized tips and do not dump the residual solution into the vial again.

    Note:

    1. Making serial dilution in the wells directly is not permitted.
    2. Prepare standards within 15 minutes before assay. Please do not dissolve the reagents at 37 °C directly.
    3. Please carefully reconstitute Standards or working Detection Reagent A and B according to the instruction, and avoid foaming and mix gently until the crystals are completely dissolved. To minimize imprecision caused by pipetting, use small volumes and ensure that pipettors are calibrated. It is recommended to suck more than 10μL for one pipetting.
    4. The reconstituted Standards, Detection Reagent A and Detection Reagent B can be used only once.
    5. If crystals have formed in the Wash Solution concentrate (30x), warm to room temperature and mix gently until the crystals are completely dissolved.
    6. Contaminated water or container for reagent preparation will influence the detection result.
    Testpräzision

    Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Extracellular Signal Regulated Kinase 2 (ERK2) were tested 20 times on one plate, respectively.
    Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Extracellular Signal Regulated Kinase 2 (ERK2) were tested on 3 different plates, 8 replicates in each plate.
    CV(%) = SD/meanX100
    Intra-Assay: CV<10%
    Inter-Assay: CV<12%

    Beschränkungen
    Nur für Forschungszwecke einsetzbar
  • Vorsichtsmaßnahmen
    The Stop Solution suggested for use with this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.
    Handhabung
    The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5 % within the expiration date under appropriate storage condition.
    To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
    Lagerung
    4 °C
    Informationen zur Lagerung
    • For unopened kit: All the reagents should be kept according to the labels on vials. The Standard, Detection Reagent A, Detection Reagent B and the 96-well strip plate should be stored at -20°C upon receipt while the others should be at 4°C.
    • For opened kit: When the kit is opened, the remaining reagents still need to be stored according to the above storage condition. Besides, please return the unused wells to the foil pouch containing the desiccant pack, and reseal along entire edge of zip-seal.
      Note: It is highly recommended to use the remaining reagents within 1 month provided this is within the expiration date of the kit.
    • For ELISA kit, 1 day storage at 37°C can be considered as 2 months at 4°C, which means 3 days at 37°C equaling 6 months at 4°C.
    Haltbarkeit
    6 months
  • Kiasalari, Baluchnejadmojarad, Roghani: "Hypericum Perforatum Hydroalcoholic Extract Mitigates Motor Dysfunction and is Neuroprotective in Intrastriatal 6-Hydroxydopamine Rat Model of Parkinson's Disease." in: Cellular and molecular neurobiology, Vol. 36, Issue 4, pp. 521-30, (2016) (PubMed).

    Du, Wang, Wang: "Role of RhoA/MERK1/ERK1/2/iNOS signaling in ocular ischemic syndrome." in: Graefe's archive for clinical and experimental ophthalmology, Vol. 254, Issue 11, pp. 2217-2226, (2016) (PubMed).

  • Target Alle ERK2 (MAPK1) ELISA Kits anzeigen
    ERK2 (MAPK1) (Mitogen-Activated Protein Kinase 1 (MAPK1))
    Andere Bezeichnung
    Extracellular Signal Regulated Kinase 2 (MAPK1 Produkte)
    Synonyme
    ERK-1 ELISA Kit, ERK1 ELISA Kit, ERT2 ELISA Kit, HS44KDAP ELISA Kit, HUMKER1A ELISA Kit, P44ERK1 ELISA Kit, P44MAPK ELISA Kit, PRKM3 ELISA Kit, p44-ERK1 ELISA Kit, p44-MAPK ELISA Kit, Erk-1 ELISA Kit, Erk1 ELISA Kit, Ert2 ELISA Kit, Esrk1 ELISA Kit, Mnk1 ELISA Kit, Mtap2k ELISA Kit, Prkm3 ELISA Kit, p44 ELISA Kit, p44erk1 ELISA Kit, p44mapk ELISA Kit, ERK ELISA Kit, ERK2 ELISA Kit, ERT1 ELISA Kit, MAPK2 ELISA Kit, P42MAPK ELISA Kit, PRKM1 ELISA Kit, PRKM2 ELISA Kit, p38 ELISA Kit, p40 ELISA Kit, p41 ELISA Kit, p41mapk ELISA Kit, 9030612K14Rik ELISA Kit, AA407128 ELISA Kit, AU018647 ELISA Kit, C78273 ELISA Kit, Erk2 ELISA Kit, Prkm1 ELISA Kit, p42mapk ELISA Kit, zERK2 ELISA Kit, MAPK1 ELISA Kit, Xp42 ELISA Kit, erk ELISA Kit, erk2 ELISA Kit, ert1 ELISA Kit, mapk ELISA Kit, mapk1b ELISA Kit, mapk2 ELISA Kit, mpk1 ELISA Kit, prkm1 ELISA Kit, prkm2 ELISA Kit, mapk1 ELISA Kit, mapk1a ELISA Kit, xp42 ELISA Kit, ATMPK1 ELISA Kit, F14N23.9 ELISA Kit, F14N23_9 ELISA Kit, MITOGEN-ACTIVATED PROTEIN KINASE ELISA Kit, mitogen-activated protein kinase 1 ELISA Kit, MNK1 ELISA Kit, ATMPK2 ELISA Kit, MITOGEN-ACTIVATED PROTEIN KINASE HOMOLOG 2 ELISA Kit, T30E16.13 ELISA Kit, T30E16_13 ELISA Kit, mitogen-activated protein kinase homolog 2 ELISA Kit, mitogen-activated protein kinase 3 ELISA Kit, mitogen-activated protein kinase 1 ELISA Kit, mitogen activated protein kinase 1 ELISA Kit, mitogen-activated protein kinase 1 L homeolog ELISA Kit, mitogen-activated protein kinase 1 S homeolog ELISA Kit, mitogen activated protein kinase 3 ELISA Kit, mitogen-activated protein kinase homolog 2 ELISA Kit, MAPK3 ELISA Kit, Mapk3 ELISA Kit, MAPK1 ELISA Kit, Mapk1 ELISA Kit, mapk1 ELISA Kit, mapk1.L ELISA Kit, mapk1.S ELISA Kit, PfMAP1 ELISA Kit, MPK1 ELISA Kit, PVX_084965 ELISA Kit, LOC9328617 ELISA Kit, Tsp_01601 ELISA Kit, MPK2 ELISA Kit
    Pathways
    MAPK Signalweg, RTK Signalweg, Apoptose, Interferon-gamma Pathway, Fc-epsilon Rezeptor Signalübertragung, Response to Growth Hormone Stimulus, Activation of Innate immune Response, Cellular Response to Molecule of Bacterial Origin, Hepatitis C, Protein targeting to Nucleus, Toll-Like Receptors Cascades, Monocarboxylic Acid Catabolic Process, Autophagie, G-protein mediated Events, Signaling Events mediated by VEGFR1 and VEGFR2, Signaling of Hepatocyte Growth Factor Receptor, VEGFR1 Specific Signals, BCR Signaling, S100 Proteine
Kundenservice