COL3A1 ELISA Kit

Produktnummer ABIN5653122

Produktdetails COL3A1 ELISA Kit

Target: COL3A1 (Collagen, Type III, alpha 1 (COL3A1))

Reaktivität: Maus

Nachweismethode: Colorimetric

Methodentyp: Sandwich ELISA

Detektionsbereich: 15.62 pg/mL - 1000 pg/mL

Untere Nachweisgrenze: 15.62 pg/mL

Applikation: ELISA

Proben: Plasma, Serum

Analytische Methode: Quantitative

Spezifität: This assay has high sensitivity and excellent specificity for detection of Collagen Type III Alpha 1 (COL3a1). No significant cross-reactivity or interference between Collagen Type III Alpha 1 (COL3a1) and analogues was observed.

Sensitivität: 6.4 pg/mL

Anwendungsinformationen

Kommentare:

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5 % within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Testdauer: 3 h

Plattentyp: Pre-coated

Protokoll: The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Collagen Type III Alpha 1 (COL3a1). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Collagen Type III Alpha 1 (COL3a1). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Collagen Type III Alpha 1 (COL3a1), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Collagen Type III Alpha 1 (COL3a1) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Testpräzision: Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Collagen Type III Alpha 1 (COL3a1) were tested 20 times on one plate, respectively
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Collagen Type III Alpha 1 (COL3a1) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Beschränkungen: Nur für Forschungszwecke einsetzbar

Handhabung

Handhabung: The Stop Solution is acidic. Do not allow to contact skin or eyes. Calibrators, controls and specimen samples should be assayed in duplicate. Once the procedure has been started, all steps should be completed without interruption.

Lagerung: 4 °C,-20 °C

Informationen zur Lagerung: -20°C. Bring all reagents to room temperature before beginning test. The kit may be stored at 4°C for immediate use within two days upon arrival. Reseal any unused strips with desiccant pack. Minimize freeze/thaw cycles.

Haltbarkeit: 4-8 months

Details zu COL3A1

Target: COL3A1 (Collagen, Type III, alpha 1 (COL3A1))

Andere Bezeichnung: Collagen Type III Alpha 1 (COL3A1 Produkte)

Synonyme: EDS4A ELISA Kit, AW550625 ELISA Kit, Col3a-1 ELISA Kit, MMS10-W ELISA Kit, Ms10w ELISA Kit, mKIAA4231 ELISA Kit, col3a1 ELISA Kit, collagen type III alpha 1 chain ELISA Kit, collagen, type III, alpha 1 ELISA Kit, collagen, type III, alpha 1 (Ehlers-Danlos syndrome type IV, autosomal dominant) S homeolog ELISA Kit, COL3A1 ELISA Kit, Col3a1 ELISA Kit, col3a1 ELISA Kit, col3a1.S ELISA Kit

Hintergrund:

Gene Name: Collagen Type III Alpha 1

Gene Aliases: COL3-A1, COL3A1, EDS4A, Collagen Type III Alpha 1, Ehlers-Danlos Syndrome Type IV Autosomal Dominant, Collagen Alpha-1(III)chain

UniProt: Q7TT32

Pathways: Autophagie, Growth Factor Binding