Maus IgM isotype control (FITC)
-
- Target Alle IgM Produkte
- IgM
-
Wirt
- Maus
- Konjugat
- FITC
- Applikation
- Isotype Control (IsoC), Flow Cytometry (FACS), Immunofluorescence (IF)
- Produktmerkmale
- This mouse monoclonal IgG2a was produced against a synthetic hapten, which is normally not present in humans or animals. Therefore, this mouse IgG2a does not react with any antigen of human or animal cells.
-
Klon
- ICIGM
- Isotyp
- IgM
-
Mouse IgM isotype control
IsoC Monoclonal MML IgM unconjugated
Rat IgM isotype controlIsoC, ELISA, WB IgM Native unconjugated
Mouse IgM isotype controlIsoC Polyclonal IgM unconjugated
Mouse IgM isotype control (FITC)IsoC, FACS, IF IgM FITC
Mouse IgM isotype controlIsoC, FACS IgM unconjugated
Mouse IgM isotype control (FITC)FACS, ELISA Monoclonal 11E10 IgM FITC
Human IgM isotype controlELISA, WB, IHC IgM unconjugated
Mouse IgM isotype control (PE)IsoC, FACS, IF IgM PE
Mouse IgM isotype control (APC)IsoC, FACS, IF IgM APC
Mouse IgM isotype control (PE-Cy5)IsoC, FACS, IF IgM PE-Cy5
-
- Applikationshinweise
- It is recommended for use in flow cytometry. This reagent is effective for direct immunofluorescence staining of human tissue for flow cytometric analysis using 20 µL/10^6 cells.
- Kommentare
-
Fluorescein isothiocyanate (Molecular Probes).
Excitation/Emission wavelength: 494 nm/514 nm - Probennahme
- 1. Transfer 100 µL of anticoagulated (EDTA) blood to a 12 x 75 mm polystyrene test tube (10^6 cells). 2. Add 20 µL of Isotype Control IgM and mix gently with a vortex mixer. The 20 µL is a guideline only, the correct volume depends on the quantity of direct monoclonal used. 3. Incubate in the dark at room temperature at 4 °C for 30 minutes or at room temperature (20-25 °C) for 15 minutes. 4. Add 1,5 mL of Lysing Solution to each sample and mix gently with a vortex mixer. Incubate for 10 minutes at room temperature in the dark. 5. Centrifuge at 1000 x g for 5 minutes. Gently aspirate the supernatant and discard it leaving approximately 50 µL of fluid. 6. Add 2 mL 0.01 mol/l PBS (It betters that it containing 2 % bovine serum albumin) and resuspend the cells by using a vortex mixer. 7. Centrifuge at 1000 x g for 5 minutes. Gently aspirate the supernatant and discard it leaving approximately 50 µL of fluid. 8. Resuspend pellet in an appropriate fluid for flow cytometry, e.g. 0.3 mL PBS. The PBS should contain 1 % paraformaldehyde (fixative) if samples are not analysed the same day. 9. Analyse on a flow cytometer or store at 2-8 °C in the dark until analysis. Samples can be run up to 24 hours after lysis.
- Beschränkungen
- Nur für Forschungszwecke einsetzbar
-
- Format
- Liquid
- Buffer
- The conjugate is provided in liquid form in buffer containing Antibody Stabilizer solution, PBS 20 mM, pH 7,4.
- Konservierungsmittel
- Sodium azide
- Vorsichtsmaßnahmen
- 1. The device is not intended for clinical use including diagnosis, prognosis, and monitoring of a disease state, and it must not be used in conjunction with patient records or treatment. 2. This product contains Sodium azide (NaN3), a chemical highly toxic in pure form. At product concentrations, though not classified as hazardous, Sodium azide may react with lead and copper plumbing to form highly explosive build-ups of metal azides. Upon disposal, flush with large volumes of water to prevent metal azide build-up in plumbing. 3. As with any product derived from biological sources, proper handling procedures should be used.
- Handhabung
- Product is photosensitive and should be protected from light.
- Lagerung
- 4 °C
-
- Target
- IgM
- Abstract
- IgM Produkte
- Synonyme
- IgM constant region Isotype Control, IGM Isotype Control
- Substanzklasse
- Antibody
-
