CRYBA1 ELISA Kit

Produktnummer ABIN5653388

Produktdetails CRYBA1 ELISA Kit

Target: CRYBA1 (Crystallin, beta A1 (CRYBA1))

Reaktivität: Maus

Nachweismethode: Colorimetric

Methodentyp: Sandwich ELISA

Detektionsbereich: 0.312 ng/mL - 20 ng/mL

Untere Nachweisgrenze: 0.312 ng/mL

Applikation: ELISA

Proben: Cell Lysate, Tissue Homogenate

Analytische Methode: Quantitative

Spezifität: This assay has high sensitivity and excellent specificity for detection of Crystallin Beta A1 (CRYbA1). No significant cross-reactivity or interference between Crystallin Beta A1 (CRYbA1) and analogues was observed.

Sensitivität: 0.118 ng/mL

Anwendungsinformationen

Kommentare:

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5 % within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Testdauer: 3 h

Plattentyp: Pre-coated

Protokoll: The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Crystallin Beta A1 (CRYbA1). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Crystallin Beta A1 (CRYbA1). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Crystallin Beta A1 (CRYbA1), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Crystallin Beta A1 (CRYbA1) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Testpräzision: Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Crystallin Beta A1 (CRYbA1) were tested 20 times on one plate, respectively
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Crystallin Beta A1 (CRYbA1) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Beschränkungen: Nur für Forschungszwecke einsetzbar

Handhabung

Handhabung: The Stop Solution is acidic. Do not allow to contact skin or eyes. Calibrators, controls and specimen samples should be assayed in duplicate. Once the procedure has been started, all steps should be completed without interruption.

Lagerung: 4 °C,-20 °C

Informationen zur Lagerung: -20°C. Bring all reagents to room temperature before beginning test. The kit may be stored at 4°C for immediate use within two days upon arrival. Reseal any unused strips with desiccant pack. Minimize freeze/thaw cycles.

Haltbarkeit: 4-8 months

Details zu CRYBA1

Target: CRYBA1 (Crystallin, beta A1 (CRYBA1))

Andere Bezeichnung: Crystallin Beta A1 (CRYBA1 Produkte)

Synonyme: CRYB1 ELISA Kit, CTRCT10 ELISA Kit, BA3/A1 ELISA Kit, Cryb ELISA Kit, BA3A1C ELISA Kit, beta-A3 ELISA Kit, cryba1 ELISA Kit, zgc:92688 ELISA Kit, CRYBA3 ELISA Kit, cryb1 ELISA Kit, zgc:92720 ELISA Kit, crystallin beta A1 ELISA Kit, crystallin, beta A1 ELISA Kit, crystallin, beta A1a ELISA Kit, crystallin beta A1 L homeolog ELISA Kit, crystallin, beta A1b ELISA Kit, CRYBA1 ELISA Kit, Cryba1 ELISA Kit, cryba1a ELISA Kit, cryba1.L ELISA Kit, cryba1 ELISA Kit, cryba1b ELISA Kit

Hintergrund:

Gene Name: Crystallin Beta A1

Gene Aliases: CRYB1, Eye Lens Structural Protein

UniProt: P02525