beta Endorphin ELISA Kit

Produktnummer ABIN8056212

Dieses Colorimetric ELISA kit dient der quantitativen Messung von Schwein beta Endorphin.

Kurzübersicht für beta Endorphin ELISA Kit (ABIN8056212)

Target: beta Endorphin (beta-EP) (Endorphin beta (beta-EP))

Reaktivität: Schwein

Nachweismethode: Colorimetric

Methodentyp: Competition ELISA

Detektionsbereich: 12.35 pg/mL - 1000 pg/mL

Applikation: ELISA

Proben: Plasma, Serum

Produktdetails beta Endorphin ELISA Kit

Untere Nachweisgrenze: 12.35 pg/mL

Verwendungszweck: ELISA Kit for Beta-Endorphin (bEP)

Analytische Methode: Quantitative

Spezifität:

This assay has high sensitivity and excellent specificity for detection of Beta-Endorphin (bEP).
No significant cross-reactivity or interference between Beta-Endorphin (bEP) and analogues was observed.

Sensitivität: < 4.89 pg/mL

Bestandteile:

• Pre-coated, 96-well strip plate
• Plate sealer
• Standard
• Standard Diluent
• Detection Reagent A
• Assay Diluent A
• Detection Reagent B
• Assay Diluent B
• TMB Substrate
• Stop Solution
• Wash Buffer (30X)
• Instruction manual

Benötigtes Material:

• Microplate reader with 450 ± 10nm filter.
• Precision single or multi-channel pipettes and disposable tips.
• Eppendorf Tubes for diluting samples.
• Deionized or distilled water.
• Absorbent paper for blotting the microtiter plate.
• Container for Wash Solution

Anwendungsinformationen

Probenmenge: 50 μL

Testdauer: 2 h

Plattentyp: Pre-coated

Protokoll: 1. Prepare all reagents, samples and standards;
2. Add 50µL standard or sample to each well.
    And then add 50µL prepared Detection Reagent A immediately.
    Shake and mix. Incubate 1 hour at 37°C;
3. Aspirate and wash 3 times;
4. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
5. Aspirate and wash 5 times;
6. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
7. Add 50µL Stop Solution. Read at 450 nm immediately.

Testpräzision:

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Beta-Endorphin (bEP) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Beta-Endorphin (bEP) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Beschränkungen: Nur für Forschungszwecke einsetzbar

Handhabung

Handhabung:

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Lagerung: 4 °C,-20 °C

Informationen zur Lagerung:

• For unopened kit: All the reagents should be kept according to the labels on vials. The Standard, Detection Reagent A, Detection Reagent B and the 96-well strip plate should be stored at -20°C upon receipt while the others should be at 4°C.
• For opened kit: When the kit is opened, the remaining reagents still need to be stored according to the above storage condition. Besides, please return the unused wells to the foil pouch containing the desiccant pack, and reseal along entire edge of zip-seal.
  Note: It is highly recommended to use the remaining reagents within 1 month provided this is within the expiration date of the kit.
• For ELISA kit, 1 day storage at 37°C can be considered as 2 months at 4°C, which means 3 days at 37°C equaling 6 months at 4°C.

Haltbarkeit: 6 months

Details zu beta Endorphin

Target: beta Endorphin (beta-EP) (Endorphin beta (beta-EP))

Andere Bezeichnung: Beta-Endorphin

Hintergrund: B-EP

Pathways: Metabolism of Steroid Hormones and Vitamin D, Peptide Hormone Metabolism, Hormone Activity