Topoisomerase II alpha ELISA Kit
Kurzübersicht für Topoisomerase II alpha ELISA Kit (ABIN7672364)
Target
Alle Topoisomerase II alpha (TOP2A) ELISA Kits anzeigenReaktivität
Nachweismethode
Methodentyp
Detektionsbereich
Applikation
Proben
Güteklasse
-
-
Untere Nachweisgrenze
- 0.313 ng/mL
-
Verwendungszweck
- Human TOP2A (DNA topoisomerase 2-alpha) QuickTest ELISA Kit
-
Analytische Methode
- Quantitative
-
Spezifität
- Specifically binds with TOP2A , no obvious cross reaction with other analogues.
-
Sensitivität
- 0.188 ng/mL
-
Bestandteile
-
- ELISA Microplate(Dismountable)
- Lyophilized Standard
- Cap/Det Ab (Ready to use
- blue)
- TMB Substrate
- Sample Dilution Buffer
- Stop Solution
- Plate Sealer
- Product Description
-
Benötigtes Material
-
- Microplate reader (wavelength: 450nm)
- 37 °C incubator (CO2 incubator for cell culture is not recommenced.)
- Automated plate washer or multi-channel pipette/5 mL pipettor
- Precision single (0.5-10μL
- 5-50μL
- 20-200μL
- 200-1000μL) and multi-channel pipette with disposable tips(Calibration is required before use.)
- Sterile tubes and Eppendorf tubes with disposable tips
- Absorbent paper and loading slot
- Deionized or distilled water
-
-
-
-
Applikationshinweise
- Optimal working dilution should be determined by the investigator.
-
Kommentare
-
Sandwich ELISA, Double Antibody
-
Probenmenge
- 50 μL
-
Testdauer
- 2 h
-
Plattentyp
- Pre-coated
-
Protokoll
- Step 1: Take out the required plate wells, add 50 µL Cap/Det Ab into each well, then add 50 µL Standard or Sample into individual well. (When adding standard or sample, the disposable tip lightly touches the liquid level. Change the disposable tips for different samples and standards.) Gently tap the plate for 10s to ensure thorough mixing then static incubate for 60 minutes at 37 °C. Washing: Wash the plate twice without immersion. Step 2: Add 100 µL HRP-Streptavidin (orange) into each well, seal the plate and static incubate for 30 minutes at 37 °C. Washing: Wash the plate five times without immersion. Step 3: Add 90 µL TMB substrate solution, seal the plate and static incubate for 10-20 minutes at 37 °C. (Accurate TMB visualization control is required.) Step 4: Add 50 µL stop solution. Read at 450nm immediately and calculate.
-
Testdurchführung
-
- Take out the required strips, add 50 µL Cap/Det Ab into each well, then add 50 µL Standard or Sample into relevant well. (When adding standard or sample, the disposable tip lightly touches the liquid level. Change the disposable tips for different samples and standards.) Gently tap the plate for 10s to ensure complete mixing then statically incubate for 60 minutes at 37 °C.
- Wash the plate twice without immersion.
- Add 100 µL HRP-Streptavidin (orange) into each well, seal the plate and statically incubate for 30 minutes at 37 °C.
- Wash the plate five times without immersion.
- Add 90 µL TMB substrate solution, seal the plate and statically incubate for 10-20 minutes at 37 °C (Accurate TMB visualization control is required.).
- Add 50 µL stop solution. Read at 450nm immediately and calculate.
-
Beschränkungen
- Nur für Forschungszwecke einsetzbar
-
-
-
Handhabung
- Avoid direct light exposure to antibody solutions
-
Lagerung
- 4 °C
-
Informationen zur Lagerung
- Store sealed Kit at 2-8° C. Do Not Cryopreserve. Store ELISA Microplate for 1 month at 2-8°C, Store for 12 month at -20°C. Put the leftover strips into a sealed foil bag with the desiccant
-
Haltbarkeit
- 12 months
-
-
- Topoisomerase II alpha (TOP2A) (Topoisomerase (DNA) II alpha 170kDa (TOP2A))
-
Andere Bezeichnung
- TOP2A
-
Hintergrund
- DNA topoisomerase 2-alpha, DNA topoisomerase II, alpha isozyme, TOP2A, TOP2
-
UniProt
- P11388
-
Pathways
- Zellzyklus, Mitotic G1-G1/S Phases
Target Alle Topoisomerase II alpha (TOP2A) ELISA Kits anzeigen
-