Telefon:
+49 (0)241 95 163 153
Fax:
+49 (0)241 95 163 155
E-Mail:
orders@antikoerper-online.de

FASL ELISA Kit

Das Human FASL ELISA Kit (ABIN7671358) ist ein Colorimetric ELISA Kit zur Detektion von Human FASL.
Produktnummer ABIN7671358
641,23 €
Zzgl. Versandkosten 20,00 € und MwSt
96 tests
Lieferung nach: Deutschland
Lieferung in 11 bis 15 Werktagen

Kurzübersicht für FASL ELISA Kit (ABIN7671358)

Target

Alle FASL ELISA Kits anzeigen
FASL (Fas Ligand (TNF Superfamily, Member 6) (FASL))

Reaktivität

  • 31
  • 18
  • 13
  • 6
  • 2
  • 2
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
  • 1
Human

Nachweismethode

Colorimetric

Methodentyp

Sandwich ELISA

Detektionsbereich

15.625 pg/mL - 1000 pg/mL

Applikation

ELISA

Proben

Biological Fluids, Cell Culture Supernatant, Cell Lysate, Plasma, Serum, Tissue Lysate

Güteklasse

Quick
  • Untere Nachweisgrenze

    15.625 pg/mL

    Verwendungszweck

    Human FASL (Factor Related Apoptosis Ligand) QuickTest ELISA Kit

    Analytische Methode

    Quantitative

    Spezifität

    Specifically binds with FASL , no obvious cross reaction with other analogues.

    Sensitivität

    9.375 pg/mL

    Bestandteile

    • ELISA Microplate(Dismountable)
    • Lyophilized Standard
    • Cap/Det Ab (Ready to use
    • blue)
    • TMB Substrate
    • Sample Dilution Buffer
    • Stop Solution
    • Plate Sealer
    • Product Description

    Benötigtes Material

    • Microplate reader (wavelength: 450nm)
    • 37 °C incubator (CO2 incubator for cell culture is not recommenced.)
    • Automated plate washer or multi-channel pipette/5 mL pipettor
    • Precision single (0.5-10μL
    • 5-50μL
    • 20-200μL
    • 200-1000μL) and multi-channel pipette with disposable tips(Calibration is required before use.)
    • Sterile tubes and Eppendorf tubes with disposable tips
    • Absorbent paper and loading slot
    • Deionized or distilled water
  • Applikationshinweise

    Optimal working dilution should be determined by the investigator.

    Kommentare

    Sandwich ELISA, Double Antibody

    Probenmenge

    50 μL

    Testdauer

    2 h

    Plattentyp

    Pre-coated

    Protokoll

    Step 1: Take out the required plate wells, add 50 µL Cap/Det Ab into each well, then add 50 µL Standard or Sample into individual well. (When adding standard or sample, the disposable tip lightly touches the liquid level. Change the disposable tips for different samples and standards.) Gently tap the plate for 10s to ensure thorough mixing then static incubate for 60 minutes at 37 °C. Washing: Wash the plate twice without immersion. Step 2: Add 100 µL HRP-Streptavidin (orange) into each well, seal the plate and static incubate for 30 minutes at 37 °C. Washing: Wash the plate five times without immersion. Step 3: Add 90 µL TMB substrate solution, seal the plate and static incubate for 10-20 minutes at 37 °C. (Accurate TMB visualization control is required.) Step 4: Add 50 µL stop solution. Read at 450nm immediately and calculate.

    Testdurchführung

    1. Take out the required strips, add 50 µL Cap/Det Ab into each well, then add 50 µL Standard or Sample into relevant well. (When adding standard or sample, the disposable tip lightly touches the liquid level. Change the disposable tips for different samples and standards.) Gently tap the plate for 10s to ensure complete mixing then statically incubate for 60 minutes at 37 °C.
    2. Wash the plate twice without immersion.
    3. Add 100 µL HRP-Streptavidin (orange) into each well, seal the plate and statically incubate for 30 minutes at 37 °C.
    4. Wash the plate five times without immersion.
    5. Add 90 µL TMB substrate solution, seal the plate and statically incubate for 10-20 minutes at 37 °C (Accurate TMB visualization control is required.).
    6. Add 50 µL stop solution. Read at 450nm immediately and calculate.

    Beschränkungen

    Nur für Forschungszwecke einsetzbar
  • Handhabung

    Avoid direct light exposure to antibody solutions

    Lagerung

    4 °C

    Informationen zur Lagerung

    Store sealed Kit at 2-8° C. Do Not Cryopreserve. Store ELISA Microplate for 1 month at 2-8°C, Store for 12 month at -20°C. Put the leftover strips into a sealed foil bag with the desiccant

    Haltbarkeit

    12 months
  • Target Alle FASL ELISA Kits anzeigen

    FASL (Fas Ligand (TNF Superfamily, Member 6) (FASL))

    Andere Bezeichnung

    FASL

    Hintergrund

    Tumor necrosis factor ligand superfamily member 6, Apoptosis antigen ligand, APTL, CD95 ligand, CD95-L, Fas antigen ligand, Fas ligand, FasL, Tumor necrosis factor ligand superfamily member 6, membrane form, Tumor necrosis factor ligand superfamily member 6, soluble form, Receptor-binding FasL ectodomain, Soluble Fas ligand, sFasL, ADAM10-processed FasL form, APL, FasL intracellular domain, FasL ICD, SPPL2A-processed FasL form, SPA, FASLG, APT1LG1, CD95L, FASL, TNFSF6

    UniProt

    P48023

    Pathways

    Apoptose, EGFR Signaling Pathway, Production of Molecular Mediator of Immune Response, Positive Regulation of Endopeptidase Activity
Sie sind hier:
Chat with us!