Telefon:
+49 (0)241 95 163 153
Fax:
+49 (0)241 95 163 155
E-Mail:
orders@antikoerper-online.de

Caspase 3 ELISA Kit

Dieses Colorimetric ELISA kit dient der quantitativen Messung von Ratte Caspase 3. Es wurde in 9 Publikationen zitiert.
Produktnummer ABIN6963116
-20% for 20 Years of ABO
527,20 €
659,00 €
Sparen Sie 131,80 € (-20 %)
Zzgl. Versandkosten 20,00 € und MwSt
Lieferung nach: Deutschland
Lieferung in 9 bis 13 Werktagen

Kurzübersicht für Caspase 3 ELISA Kit (ABIN6963116)

Target

Alle Caspase 3 (CASP3) ELISA Kits anzeigen
Caspase 3 (CASP3)

Reaktivität

  • 28
  • 14
  • 13
  • 3
  • 3
  • 2
  • 2
  • 2
  • 1
  • 1
  • 1
  • 1
Ratte

Nachweismethode

Colorimetric

Methodentyp

Sandwich ELISA

Detektionsbereich

0.31 ng/mL - 20 ng/mL

Applikation

ELISA

Proben

Plasma, Serum
  • Untere Nachweisgrenze

    0.31 ng/mL

    Verwendungszweck

    The kit is a sandwich enzyme immunoassay technique for the in vitro quantitative measurement in various sample types.

    Analytische Methode

    Quantitative

    Spezifität

    This kit recognizes Rat CASP3 in samples. No significant cross-reactivity or interference between Rat CASP3 and analogues was observed

    Sensitivität

    0.19 ng/mL

    Bestandteile

    • Pre-coated, ready to use 96-well strip plate, flat buttom
    • Plate sealer for 96 wells
    • Reference Standard
    • Reference Standard & Sample Diluent
    • Biotinylated Detection Antibody (100 x concentrate)
    • HRP Conjugate (100 x concentrate)
    • Biotinylated Detection Antibody Diluent
    • HRP Conjugate Diluent
    • Substrate Reagent
    • Stop Solution
    • Wash Buffer (25 x concentrate)
    • Instruction manual
  • Probenmenge

    100 μL

    Testdauer

    3.5 h

    Plattentyp

    Pre-coated

    Protokoll

    1. Add 100 µL standard or sample to each well. Incubate for 90 min at 37 °C.
    2. Remove the liquid. Add 100 µL Biotinylated Detection Antibody. Incubate for 1 hour at 37 °C.
    3. Aspirate and wash 3 times.
    4. Add 100 µL HRP Conjugate. Incubate for 30 min at 37 °C.
    5. Aspirate and wash 5 times.
    6. Add 90 µL Substrate Reagent. Incubate for 15 min at 37 °C.
    7. Add 50 µL Stop Solution. Read at 450 nm immediately.
    8. Calculation of results.

    Aufbereitung der Reagenzien

    1. Equilibrate all reagents to room temperature (18-25 °C) before use. If the kit will not be used up in one assay, please only take out the necessary strips and reagents for present experiment, and store the remaining strips and reagents at required condition.
    2. Standard Working Solution: Centrifuge the standard at 10,000x g for 1 min. Reconstitute with 1 mL of the Standard & Sample Diluent, allow to stand for 10 minutes, and gently invert several times until completely dissolved. Alternatively, vortex briefly at low speed, remove bubbles by low-speed centrifugation if necessary.This produces a 20 ng/mL stock solution. Prepare serial dilutions according to experimental requirements. Recommended dilution gradient: 20, 10, 5, 2.5, 1.25, 0.63, 0.31, 0 ng/mL Serial Dilution Procedure: Dispense 500 μL of Standard & Sample Diluent into 7 EP tubes, respectively. Transfer 500 μL of the stock solution into the first tube. Sequentially transfer 500 μL from the preceding tube into the next tube for subsequent dilutions. Designate the last tube as the blank, do not transfer any solution into it. Aliquot the stock and store at -20 ° C. Use within two weeks and avoid repeated freeze-thaw cycles. Serially diluted standards should be prepared immediately, prior to use.
    3. Biotinylated Detection Ab working solution: Calculate the required volume (100 μL/well) plus a slight excess. Centrifuge the Concentrated Biotinylated Detection Antibody (100x) at 800 x g for 1 minute. Dilute to 1x with Biotinylated Detection Ab Diluent at a ratio of 1:99. Prepare the working solution immediately, prior to use.
    4. HRP Conjugate Working Solution: Calculate the required volume (100 μL/well) plus a slight excess. Centrifuge the Concentrated HRP Conjugate (100x) at 800 x g for 1 minute. Centrifuge the Concentrated HRP Conjugate (100x) at 800 x g for 1 minute. Prepare the working solution immediately, prior to use.
    5. Wash Buffer: Prepare the working Wash Buffer by diluting 30 mL of Concentrated Wash Buffer with 720 mL of deionized or distilled water yielding 750 mL. Note: if crystals have formed in the concentrate, warm it in a 40 °C water bath and mix it gently until the crystals have completely dissolved. For same day use only.

    Aufbereitung der Proben

    • It is recommended to use fresh samples without long storage, otherwise protein degradation and denaturation may occur in these samples, leading to false results. Samples should therefore be stored for a short period at 2 - 8 °C or aliquoted at -20 °C (≤1 month) or -80 °C (≤ 3 months). Repeated freeze-thaw cycles should be avoided. Prior to assay, the frozen samples should be slowly thawed and centrifuged to remove precipitates.
    • If the sample type is not specified in the instructions, a preliminary test is necessary to determine compatibility with the kit.
    • If a lysis buffer is used to prepare tissue homogenates or cell culture supernatant, there is a possibility of causing a deviation due to the introduced chemical substance. The recommended dilution factor is for reference only.
    • Please estimate the concentration of the samples before performing the test. If the values are not in the range of the standard curve, the optimal sample dilution for the particular experiment has to be determined.

    Testpräzision

    Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level Rat CASP3 were tested 20 times on one plate, respectively.
    Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level Rat CASP3 were tested on 3 different plates, 20 replicates in each plate.
    Both intra-CV and inter-CV are < 10 %.

    Beschränkungen

    Nur für Forschungszwecke einsetzbar
  • Lagerung

    4 °C,-20 °C

    Informationen zur Lagerung

    1. For unopened kit: All reagents should be stored according to the labels on the vials, so they are stable up to 12 months after receipt of the kit. The Reference Standard, Biotinylated Detection Antibody, HRP Conjugate and the 96-well stripe plate should be stored at -20 °C upon receipt while the other reagents should be stored at 4 °C.
    2. For used kit: When the kit is used, the remaining reagents need to be stored according to the above storage condition. Besides, please return the unused wells to the foil pouch containing the desiccant pack, and zip-seal the foil pouch.

    Haltbarkeit

    12 months
  • Caputo, Piccialli, Ciccone, de Caprariis, Massa, De Feo, Pannaccione: "Lavender and coriander essential oils and their main component linalool exert a protective effect against amyloid-β neurotoxicity." in: Phytotherapy research : PTR, Vol. 35, Issue 1, pp. 486-493, (2021) (PubMed).

    Adedara, Fabunmi, Ayenitaju, Atanda, Adebowale, Ajayi, Owoeye, Rocha, Farombi: "Neuroprotective mechanisms of selenium against arsenic-induced behavioral impairments in rats." in: Neurotoxicology, Vol. 76, pp. 99-110, (2021) (PubMed).

    Owumi, Adedara, Farombi, Oyelere: "Protocatechuic acid modulates reproductive dysfunction linked to furan exposure in rats." in: Toxicology, Vol. 442, pp. 152556, (2021) (PubMed).

    Chuang, Chen, Hsiao, Chou, Kuo, Feng, Ho, Chen, Chuang, Lee: "Alteration in angiotensin-converting enzyme 2 by PM1 during the development of emphysema in rats." in: ERJ open research, Vol. 6, Issue 4, (2020) (PubMed).

    Çakır, Tekin, Okan, Çakan, Doğanyiğit: "The ameliorating effect of cannabinoid type 2 receptor activation on brain, lung, liver and heart damage in cecal ligation and puncture-induced sepsis model in rats." in: International immunopharmacology, Vol. 78, pp. 105978, (2020) (PubMed).

    Delkhosh-Kasmaie, Farshid, Tamaddonfard, Imani et al.: "The effects of safranal, a constitute of saffron, and metformin on spatial learning and memory impairments in type-1 diabetic rats: behavioral and hippocampal histopathological and biochemical ..." in: Biomedicine & pharmacotherapy, Vol. 107, pp. 203-211, (2019) (PubMed).

    Mahmoudi, Farshid, Tamaddonfard, Imani, Noroozinia: "Behavioral, histopathological, and biochemical evaluations on the effects of cinnamaldehyde, naloxone, and their combination in morphine-induced cerebellar toxicity." in: Drug and chemical toxicology, pp. 1-12, (2019) (PubMed).

    Adedara, Adebowale, Atanda, Fabunmi, Ayenitaju, Rocha, Farombi: "Selenium abates reproductive dysfunction via attenuation of biometal accumulation, oxido-inflammatory stress and caspase-3 activation in male rats exposed to arsenic." in: Environmental pollution (Barking, Essex : 1987), Vol. 254, Issue Pt B, pp. 113079, (2019) (PubMed).

    Lu, Wang: "SIRT1 exerts neuroprotective effects by attenuating cerebral ischemia/reperfusion-induced injury via targeting p53/microRNA-22." in: International journal of molecular medicine, Vol. 39, Issue 1, pp. 208-216, (2017) (PubMed).

  • Target Alle Caspase 3 (CASP3) ELISA Kits anzeigen

    Caspase 3 (CASP3)

    Andere Bezeichnung

    Caspase 3

    Hintergrund

    Target Synonym: Casp3,Cpp32,Caspase-3,CPP-32,IRPLICE,SCA-1,Protein Yama,Caspase 3 subunit p17,Caspase-3 subunit p12

    Gen-ID

    25402

    UniProt

    P55213

    Pathways

    Apoptose, Caspase Kaskade in der Apoptose, Sensory Perception of Sound, ER-Nucleus Signaling, Positive Regulation of Endopeptidase Activity, Activated T Cell Proliferation
Sie sind hier:
Chat with us!