MEP1A ELISA Kit
Kurzübersicht für MEP1A ELISA Kit (ABIN5656829)
Target
Alle MEP1A ELISA Kits anzeigenReaktivität
Nachweismethode
Methodentyp
Detektionsbereich
Applikation
Proben
-
-
Untere Nachweisgrenze
- 49.4 pg/mL
-
Verwendungszweck
- Mouse Meprin A Alpha (MEP1a) ELISA Kit for detecting MEP1a in serum, plasma, tissue homogenates, cell lysates, cell culture supernates
-
Analytische Methode
- Quantitative
-
Spezifität
- This assay has high sensitivity and excellent specificity for detection of Meprin A Alpha (MEP1a). No significant cross-reactivity or interference between Meprin A Alpha (MEP1a) and analogues was observed.
-
Sensitivität
- 19.1 pg/mL
-
Bestandteile
-
- Pre-coated, ready to use 96-well strip plate
- Standar
- Detection Reagent A
- Detection Reagent B
- TMB Substrate
- Stop Solution
- Assay Diluent A
- Assay Diluent B
- Wash Buffer (30x concentrate)
- Standard Diluent
- Plate Sealer
- Instruction Manual
-
Benötigtes Material
-
- Microplate Reader with 450 nm filter
- Single or multi-channel pipettes with high precision and disposable tips
- Microcentrifuge tubes
- Deionized or distilled watter
- Absorbent paper for blotting the microplate
- Container for wash solution
- 0.01 M (or 1x) Phosphate Buffered Saline (PBS), ph 7.0-7.2
-
-
-
-
Applikationshinweise
- Optimal working dilution should be determined by the investigator.
-
Kommentare
-
This product is tested and assembled before shipping to ensure that it meets its quality specifications. All kits are tested to confirm that they fall within their defined Inter- and Intra- assay coefficient of variation.
-
Probenmenge
- 50 μL
-
Testdauer
- 2 h
-
Plattentyp
- Pre-coated
-
Protokoll
- This assay employs the competitive inhibition enzyme immunoassay technique. A monoclonal antibody specific to Meprin A Alpha (MEP1a) has been pre-coated onto a microplate. A competitive inhibition reaction is launched between biotin labeled Meprin A Alpha (MEP1a) and unlabeled Meprin A Alpha (MEP1a) (Standards or samples) with the pre-coated antibody specific to Meprin A Alpha (MEP1a). After incubation the unbound conjugate is washed off. Next, avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. The amount of bound HRP conjugate is reverse proportional to the concentration of Meprin A Alpha (MEP1a) in the sample. After addition of the substrate solution, the intensity of color developed is reverse proportional to the concentration of Meprin A Alpha (MEP1a) in the sample.
-
Testpräzision
-
Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Meprin A Alpha (MEP1a) were tested 20 times on one plate, respectively
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Meprin A Alpha (MEP1a) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12% -
Beschränkungen
- Nur für Forschungszwecke einsetzbar
-
-
-
Handhabung
- The Stop Solution is acidic. Do not allow to contact skin or eyes. Calibrators, controls and specimen samples should be assayed in duplicate. Once the procedure has been started, all steps should be completed without interruption.
-
Lagerung
- 4 °C,-20 °C
-
Informationen zur Lagerung
- -20°C. Bring all reagents to room temperature before beginning test. The kit may be stored at 4°C for immediate use within two days upon arrival. Reseal any unused strips with desiccant pack. Minimize freeze/thaw cycles.
-
Haltbarkeit
- 12 months
-
-
- MEP1A (Meprin A, alpha (PABA Peptide Hydrolase) (MEP1A))
-
Andere Bezeichnung
- Meprin A Alpha
-
Hintergrund
- Gene Aliases: PPHA, PABA Peptide Hydrolase, Endopeptidase-2, N-benzoyl-L-tyrosyl-P-amino-Benzoic Acid Hydrolase Subunit Alpha, PABA Peptide Hydrolase
-
Gen-ID
- 17287
-
UniProt
- P28825
Target Alle MEP1A ELISA Kits anzeigen
-