PLAU ELISA Kit

Produktnummer ABIN2748726

Dieses Colorimetric ELISA-Kit wurde entwickelt für die quantitative Messung von Rhesusaffen PLAU.

Kurzübersicht für PLAU ELISA Kit (ABIN2748726)

Target: PLAU (Plasminogen Activator, Urokinase (PLAU))

Reaktivität: Rhesusaffen

Nachweismethode: Colorimetric

Methodentyp: Sandwich ELISA

Applikation: ELISA

Proben: Cell Culture Supernatant, Cell Lysate, Plasma, Serum, Tissue Lysate

Produktdetails PLAU ELISA Kit

Verwendungszweck: Custom Rhesus Macaque urokinase-type Plasminogen Activator (uPA) ELISA Kit.

Analytische Methode: Quantitative

Spezifität: The antibody pair provided in this kit recognizes Rhesus Macaque urokinase-type Plasminogen Activator (uPA)

Produktmerkmale:

• Strip plates and additional reagents allow for use in multiple experiments
• Quantitative protein detection
• Establishes normal range
• The best products for confirmation of antibody array data

Bestandteile:

• Pre-Coated 96-well Strip Microplate
• Wash Buffer
• Stop Solution
• Assay Diluent(s)
• Lyophilized Standard
• Biotinylated Detection Antibody
• Streptavidin-Conjugated HRP
• TMB One-Step Substrate

Benötigtes Material:

• Distilled or deionized water
• Precision pipettes to deliver 2 μL to 1 μL volumes
• Adjustable 1-25 μL pipettes for reagent preparation
• 100 μL and 1 liter graduated cylinders
• Tubes to prepare standard and sample dilutions
• Absorbent paper
• Microplate reader capable of measuring absorbance at 450nm
• Log-log graph paper or computer and software for ELISA data analysis

Anwendungsinformationen

Probenmenge: 100 μL

Plattentyp: Pre-coated

Protokoll:

1. Prepare all reagents, samples and standards as instructed in the manual.
2. Add 100 μL of standard or sample to each well.
3. Incubate 2.5 h at RT or O/N at 4 °C.
4. Add 100 μL of prepared biotin antibody to each well.
5. Incubate 1 h at RT.
6. Add 100 μL of prepared Streptavidin solution to each well.
7. Incubate 45 min at RT.
8. Add 100 μL of TMB One-Step Substrate Reagent to each well.
9. Incubate 30 min at RT.
10. Add 50 μL of Stop Solution to each well.
11. Read at 450 nm immediately.

Testdurchführung:

Prepare all reagents, samples and standards as instructed in the manual.Add 100 μL of standard or sample to each well.Incubate 2.5 h at RT or O/N at 4 °C.Add 100 μL of prepared biotin antibody to each well.Incubate 1 h at RT.Add 100 μL of prepared Streptavidin solution to each well.Incubate 45 min at RT.Add 100 μL of TMB One-Step Substrate Reagent to each well.Incubate 30 min at RT.Add 50 μL of Stop Solution to each well.Read at 450 nm immediately.

Beschränkungen: Nur für Forschungszwecke einsetzbar

Handhabung

Lagerung: -20 °C

Informationen zur Lagerung: The entire kit may be stored at -20°C for up to 1 year from the date of shipment. Avoid repeated freeze-thaw cycles. The kit may be stored at 4°C for up to 6 months. For extended storage, it is recommended to store at -80°C.

Haltbarkeit: 6 months

Details zu PLAU

Target: PLAU (Plasminogen Activator, Urokinase (PLAU))

Andere Bezeichnung: uPA

Hintergrund: Urokinase-type Plasminogen Activator (uPA)

UniProt: F7HIM7

Pathways: Cellular Response to Molecule of Bacterial Origin, Carbohydrate Homeostasis, Autophagie, Smooth Muscle Cell Migration