Angiotensin I Converting Enzyme 1 ELISA Kit

Produktnummer ABIN1112549

Dieses Colorimetric ELISA kit dient der quantitativen Messung von Human Angiotensin I Converting Enzyme 1.

Kurzübersicht für Angiotensin I Converting Enzyme 1 ELISA Kit (ABIN1112549)

Target: Angiotensin I Converting Enzyme 1 (ACE) (Angiotensin I Converting Enzyme (Peptidyl-Dipeptidase A) 1 (ACE))

Reaktivität: Human

Nachweismethode: Colorimetric

Methodentyp: Sandwich ELISA

Detektionsbereich: 780 pg/mL - 50000 pg/mL

Applikation: ELISA

Proben: Cell Culture Supernatant, Plasma, Serum, Tissue Lysate

Produktdetails Angiotensin I Converting Enzyme 1 ELISA Kit

Untere Nachweisgrenze: 780 pg/mL

Verwendungszweck: For quantitative detection of ACE in Human serum, plasma, tissue lysates,cell culture supernatants.

Analytische Methode: Quantitative

Sensitivität: < 5 pg/mL

Bestandteile: 1. One 96-well plate pre-coated with anti-human ACE antibody 2. Lyophilized human ACE standards: 2 tubes (10ng / tube) 3. Sample / Standard diluent buffer: 30ml 4. Biotin conjugated anti-human ACE antibody (Concentrated): 130 µl.

Benötigtes Material:

1. 37 °C incubator
2. Microplate reader (wavelength: 450 nm)
3. Precise pipette and disposable pipette tips
4. Automated plate washer
5. ELISA shaker
6. 1.5 mL of Eppendorf tubes
7. Plate cover
8. Absorbent filter papers
9. Plastic or glass container with volume of above 1 L

Anwendungsinformationen

Applikationshinweise: Optimal working dilution should be determined by the investigator.

Kommentare:

This kit was based on sandwich enzyme-linked immune-sorbent assay technology. Anti-ACE polyclonal antibody was pre-coated onto 96-well plates. And the biotin conjugated anti-ACE polyclonal antibody was used as detection antibodies. The standards test samples and biotin conjugated detection antibody were added - the wells subsequently and wash with wash buffer. Avidin-Biotin-Peroxidase Complex was added and unbound conjugates were washed away with wash buffer. TMB substrates were used - visualize HRP enzymatic reaction. TMB was catalyzed by HRP - produce a blue color product that changed into yellow after adding acidic stop solution. The density of yellow is proportional - the ACE amount of sample captured in plate. Read the O.D. absorbance at 450 nm in a microplate reader and then the concentration of ACE can be calculated.

Plattentyp: Pre-coated

Aufbereitung der Reagenzien:

1. Before the experiment, centrifuge each kit component for several minutes to bring down all reagents to the bottom of tubes. 2. It is recommend to measure each standard and sample in duplicate. 3. Do NOT let the plate completely dry at any time! Since the dry condition can inactivate the biological material on the plate. 4. Do not reuse pipette tips and tubes to avoid cross contamination. 5. Do not use the expired components and the components from different batches. 6. To avoid the marginal effect of plate incubation for temperature differences (the marginal wells always get stronger reaction), it is recommend to equilibrate the ABC working solution and TMB substrate for at least 30 min at room temperature (37 °C ) before adding to wells.The TMB substrate (Kit Component 8) is colorless and transparent before use, if not, please contact us for replacement.

Aufbereitung der Proben:

Preparation of sample and reagents 1. Sample Isolate the test samples soon after collecting, then, analyze immediately (within 2 hours). Or aliquot and store at -20 °C for long term. Avoid multiple freeze-thaw cycles.
Body fluids, tissue lysates and cell culture supernatants: Centrifuge to remove precipitate, analyze immediately or aliquot and store at -20 °C .
Serum: Coagulate the serum at room temperature (about 2 hours). Centrifuge at approximately 1000 × g for 15 min. Analyze the serum immediately or aliquot and store at -20 °C .
Plasma: Collect plasma with heparin as the anticoagulant. Centrifuge for 15 min at 1000 x g within 30 min of collection. Analyze immediately or aliquot and store frozen at -20 °C. EDTA and citrate can not be used as anticoagulant here. Note: 1. Coagulate blood samples completely, then, centrifuge, and avoid hemolysis and particle. 2. NaN3 can not be used as test sample preservative, since it is the inhibitor for HRP.

Beschränkungen: Nur für Forschungszwecke einsetzbar

Handhabung

Konservierungsmittel: Sodium azide, Thimerosal (Merthiolate)

Lagerung: 4 °C,-20 °C

Informationen zur Lagerung: Store at 2-8°C for 6 months, or at -20°C for 12 months.

Haltbarkeit: 12 months

Details zu Angiotensin I Converting Enzyme 1

Target: Angiotensin I Converting Enzyme 1 (ACE) (Angiotensin I Converting Enzyme (Peptidyl-Dipeptidase A) 1 (ACE))

Andere Bezeichnung: ACE

Hintergrund: Angiotensin-converting enzyme (ACE) is a circulating enzyme that participates in the body's renin-angiotensin system (RAS), which mediates extracellular volume and arterial vasoconstriction. It is secreted by pulmonary and renal endothelial cells and catalyzes the conversion of decapeptide angiotensin I to octapeptide angiotensin II. It plays an important role in blood pressure regulation, and also plays a crucial role in fertilization through its GPIase activity. The enzyme is also able to inactivate bradykinin, a potent vasodilator. It has a molecular weight of 80,073.

Pathways: ACE Inhibitor Pathway, Peptide Hormone Metabolism, Regulation of Systemic Arterial Blood Pressure by Hormones, Feeding Behaviour, Smooth Muscle Cell Migration