Telefon:
+49 (0)241 95 163 153
Fax:
+49 (0)241 95 163 155
E-Mail:
orders@antikoerper-online.de

TNNC1 ELISA Kit

TNNC1 Reaktivität: Kaninchen Colorimetric Sandwich ELISA Serum
Produktnummer ABIN956153
  • Target Alle TNNC1 ELISA Kits anzeigen
    TNNC1 (Cardiac Troponin C (TNNC1))
    Reaktivität
    • 3
    • 3
    • 2
    • 2
    • 2
    • 2
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    Kaninchen
    Nachweismethode
    Colorimetric
    Methodentyp
    Sandwich ELISA
    Applikation
    ELISA
    Proben
    Serum
    Analytische Methode
    Quantitative
    Produktmerkmale
    The Rabbit Cardiac Troponin-I ELISA uses two different affinity purified cTnI specific antibodies. One is used for solid phase immobilization (on the microtiter wells). The second is conjugated to horseradish peroxidase (HRP). The serum sample is allowed to react simultaneously with the two antibodies, resulting in cTnI being sandwiched between the solid phase and HRP-conjugated antibodies. After one hour incubation at room temperature on a plate shaker, the wells are washed to remove unbound HRP-conjugated antibodies. A solution of TMB (Tetramethylbenzidine), an HRP substrate, is then added and incubated for 20 minutes, resulting in the development of a blue color. The color development is stopped with the addition of 1N HCl changing the color to yellow. The concentration of cTnI is proportional to the absorbance at 450 nm.
    Bestandteile
    Anti-cTnI-coated microtiter wells, 96 wells
    Rabbit cTnI Calibrator (lyophilized), reconstitute with 0.40 mL H2O
    cTnI Diluent, 12 mL
    cTnI HRP Conjugate, 11 mL
    Wash Solution (20X), 50 mL
    TMB Reagent, 11 mL
    Stop Solution (1N HCl), 11 mL.
    Benötigtes Material
    Pipettes: P-10, P-200 & P-1000 or equivalent
    Disposable pipette tips
    Distilled or de-ionized water
    Vortex mixer
    Absorbent paper
    Graph paper or appropriate PC graphing software
    Polypropylene microcentrifuge tubes (1.5 mL)
    Microtiter plate reader capable of reading 0 to 4 OD at 450 nm.
    Featured
    Zu unserem meistverkauften TNNI3 ELISA Kit
    Top Product
    Discover our top product TNNC1 ELISA Kit
  • Plattentyp
    Pre-coated
    Aufbereitung der Proben

    Serum should be prepared as quickly as possible after blood collection and stored at 4°C. All samples should be similarly processed (i.e., storage times and temperatures should be the same). If serum samples cannot be assayed immediately they should be frozen at -70°C and thawed only once prior to use.

    Testdurchführung
    1. Secure the desired number of coated wells in the holder.
      2. Dispense 100 µL of cTnI HRP Conjugate into each well.
      3. Dispense 100 µL of calibrators and samples into the appropriate wells.
      4. Incubate at room temperature (18-25°C) on a plate shaker (150 rpm) for one hour.
      5. Remove the incubation mixture using a plate washer or by flicking plate contents into a bio-waste container.
      6. Wash and empty the microtiter wells 5 times with 1X wash solution. This may be performed using either a plate washer (400 µL/well) or with a squirt bottle. The entire wash procedure should be performed as quickly as possible. (Use of a plate washer gives optimal results).
      7. Strike the wells sharply onto adsorbent paper or paper towels to remove all residual droplets.
      8. Dispense 100 µL of TMB Reagent solution into each well. Gently mix for 5 seconds.
      9. Incubate on a plate shaker (150 rpm) at room temperature for 20 minutes.
      10. Stop the reaction by adding 100 µL of Stop Solution to each well.
      11. Gently mix. It is important to make sure that all the blue color changes to yellow.
      12. Read absorbance at 450 nm with a microtiter plate reader within 15 minutes. Please note: Due to plate reader differences, the high calibrator absorbance values may be out of range occasionally. If this occurs, absorbance values may be determined at 405 nm instead.
      13. If absorbance values exceed the high calibrator, the samples should be appropriately diluted with cTnI diluent and re-determined. Samples with absorbance values below those of the lowest calibrator should be assigned a zero troponin-I value.
    Ergebnisberechnung
    1. Calculate the mean absorbance values (A450) for each set of reference calibrators and samples.
      2. Construct a calibration curve by plotting the mean absorbance obtained from each reference calibrator against its concentration in ng/mL on graph paper, with absorbance values on the vertical or Y-axis and concentration on the horizontal or X-axis.
      3. Using the mean absorbance value for each sample, determine the corresponding concentration of cTnI in ng/mL from the calibration curve.
      4. If available, graphing software may be used to analyze the data. Depending on the range of the calibration curve used, we find that good fits of the data may be obtained with linear regression analysis or using a two-site binding model. Alternatively, calibration curves may be generated using a point-to-point fit.
    Beschränkungen
    Nur für Forschungszwecke einsetzbar
  • Lagerung
    4 °C
    Informationen zur Lagerung
    Store kit at 4°C. Keep the microtiter plate in a sealed bag with desiccant to minimize exposure to damp air. The expiration date of the kit is indicated on the box label.
    Haltbarkeit
    The expiry date is stated on the label.
  • Target Alle TNNC1 ELISA Kits anzeigen
    TNNC1 (Cardiac Troponin C (TNNC1))
    Andere Bezeichnung
    Cardiac Troponin-1 (TNNC1 Produkte)
    Synonyme
    CMD1Z ELISA Kit, CMH13 ELISA Kit, TN-C ELISA Kit, TNC ELISA Kit, TNNC ELISA Kit, cTnC ELISA Kit, tnnc1 ELISA Kit, zgc:103465 ELISA Kit, PCTNC1 ELISA Kit, cmd1z ELISA Kit, cmh13 ELISA Kit, tnc ELISA Kit, tnnc ELISA Kit, MGC80066 ELISA Kit, TNNC1 ELISA Kit, AI874626 ELISA Kit, TnC ELISA Kit, cTnI ELISA Kit, tncc ELISA Kit, Tncc ELISA Kit, stnnc ELISA Kit, zgc:86932 ELISA Kit, troponin C1, slow skeletal and cardiac type ELISA Kit, troponin C type 1a (slow) ELISA Kit, troponin C type 1 (slow) L homeolog ELISA Kit, cardiac troponin C ELISA Kit, troponin C, cardiac/slow skeletal ELISA Kit, troponin C type 1b (slow) ELISA Kit, TNNC1 ELISA Kit, tnnc1a ELISA Kit, tnnc1.L ELISA Kit, tnnc1 ELISA Kit, Tnnc1 ELISA Kit, tnnc1b ELISA Kit
    Hintergrund
    Troponin is the inhibitory or contractile regulating protein complex of striated muscle. It is located periodically along the thin filament of the muscle and consists of three distinct proteins: troponin I, troponin C, and troponin T. The troponin I subunit exists in three isoforms, two in fast-twitch and slow-twitch skeletal muscle fibers, and one in cardiac muscle. At the sequence level cardiac troponin-I (cTnI) is significantly different from the skeletal isoforms and antibodies can be prepared that specifically recognize cTnI. The unique isoform and tissue specificity of cTnI are the basis for its use as a marker of cardiac muscle damage.
Sie sind hier:
Kundenservice