Telefon:
+49 (0)241 95 163 153
Fax:
+49 (0)241 95 163 155
E-Mail:
orders@antikoerper-online.de

Myoglobin ELISA Kit

MB Reaktivität: Hund Colorimetric Sandwich ELISA
Produktnummer ABIN956102
  • Target Alle Myoglobin (MB) ELISA Kits anzeigen
    Myoglobin (MB)
    Reaktivität
    • 4
    • 4
    • 3
    • 3
    • 3
    • 2
    • 2
    • 2
    • 2
    • 1
    • 1
    • 1
    Hund
    Nachweismethode
    Colorimetric
    Methodentyp
    Sandwich ELISA
    Applikation
    ELISA
    Analytische Methode
    Quantitative
    Produktmerkmale
    The Dog Myoglobin ELISA is based on the principle of a solid phase enzyme-linked immunosorbent assay (ELISA). A monoclonal anti-myoglobin antibody is used for solid phase immobilization (on the microtiter wells) and polyclonal anti-myoglobin antibody conjugated to horseradish peroxidase is in the antibody-enzyme conjugate solution. The test sample is allowed to react simultaneously with the two antibodies, resulting in the myoglobin molecules being sandwiched between the solid phase and enzyme-linked antibodies. After one hour incubation at room temperature, the wells are washed to remove unbound labeled antibodies. A TMB (Tetramethyl-benzidine) Reagent is added and incubated for 20 minutes, resulting in the development of a blue color. The color development is stopped with the addition of Stop Solution changing the color to yellow. The concentration of myoglobin is proportional to the color intensity of the test sample. Absorbance is measured spectrophotometrically at 450 nm.
    Bestandteile
    Anti-myoglobin-coated microtiter wells, 96 wells
    Dog Myoglobin Calibrator (50 µg/mL), 50 µL
    Diluent, 12 mL
    Enzyme Conjugate Reagent, 11 mL
    Wash Solution (20X), 50 mL
    TMB Reagent (One-Step), 11 mL
    Stop Solution (1N HCl), 11 mL.
    Benötigtes Material
    Precision pipettes
    Disposable pipette tips
    Distilled or de-ionized water
    Vortex mixer
    Absorbent paper or paper towels
    Graph paper (PC graphing software is optional but recommended)
    Plate shaker
    Microtiter plate reader
    Featured
    Zu unserem meistverkauften MB ELISA Kit
    Top Product
    Discover our top product MB ELISA Kit
  • Plattentyp
    Pre-coated
    Aufbereitung der Proben

    Samples may be tested undiluted or after dilution with diluent. The dilution factor should be determined empirically. On occasion a matrix effect may be observed with urine samples that may slightly increase or decrease absorbance values and we therefore strongly recommend that all urine samples within a particular study be similarly diluted. Only 20 µL of sample is required per assay (2 x 20 µL, if samples are to be tested in duplicate).
    PROCEDURAL NOTES
    1. Calibrators should be prepared immediately prior to use and should be used within 30 minutes of preparation.
    2. Pipetting of conjugate, calibrators and samples into the microtiter plate should be completed within 10 minutes.
    3. We recommend that calibrators and samples be run in duplicate.
    4. It is recommended that the wells be read within 5 minutes following addition of Stop Solution.

    Testdurchführung
    1. Ensure that all reagents are at room temperature.
      2. Secure the desired number of coated wells in the holder.
      3. Dispense 100 µL of Enzyme Conjugate Reagent into each well.
      4. Dispense 20 µL of myoglobin calibrators and samples (in duplicate) into the appropriate wells.
      5. Incubate at room temperature (18-25°C) on a plate shaker for one hour. Mix Gently (~100-150 rpm).
      6. Remove the incubation mixture either with a plate washer or by flicking plate contents into a waste container.
      7. Wash and empty the microtiter wells 5 times with 1X wash solution. This may be performed using either a plate washer (400 µL/well) or with a squirt bottle. The entire wash procedure should be performed as quickly as possible.
      8. Strike the wells sharply onto adsorbent paper or paper towels to remove all residual wash buffer.
      9. Dispense 100 µL of TMB Reagent solution into each well. Gently mix for 5 seconds.
      10. Incubate on a plate shaker at room temperature for 20 minutes. Mix Gently.
      11. Stop the reaction by adding 100 µL of Stop Solution to each well.
      12. Gently mix for 30 seconds. It is important to make sure that all the blue color changes to yellow color completely.
      13. Read absorbance at 450 nm with a microtiter plate reader within 5 minutes.
    Ergebnisberechnung
    1. Calculate the mean absorbance values for each set of reference calibrators and samples.
      2. Construct a calibration curve by plotting the mean absorbance obtained from each reference calibrator against its concentration in ng/mL on graph paper, with absorbance values on the vertical or Y-axis and concentration on the horizontal or X-axis.
      3. Using the mean absorbance value for each sample, determine the corresponding concentration of myoglobin in ng/mL from the calibration curve.
      4. Multiply the derived values by the appropriate dilution factor if the test samples were diluted.
      5. Graphing software, if available, should be used.
    Beschränkungen
    Nur für Forschungszwecke einsetzbar
  • Lagerung
    -20 °C
    Informationen zur Lagerung
    Store dog myoglobin calibrator at -20°C. Store the remainder of the kit at 4°C.
  • Target Alle Myoglobin (MB) ELISA Kits anzeigen
    Myoglobin (MB)
    Andere Bezeichnung
    Myoglobin (MB Produkte)
    Synonyme
    PVALB ELISA Kit, AI325109 ELISA Kit, zgc:65819 ELISA Kit, zgc:77764 ELISA Kit, MB ELISA Kit, DKFZp468H096 ELISA Kit, myg ELISA Kit, mb ELISA Kit, MYF4 ELISA Kit, bHLHc3 ELISA Kit, myo ELISA Kit, Myoglobin ELISA Kit, myoglobin ELISA Kit, myogenin ELISA Kit, MB ELISA Kit, Mb ELISA Kit, mb ELISA Kit, myg ELISA Kit, Myog ELISA Kit
    Hintergrund
    Myoglobin is a heme protein found in both cardiac and skeletal muscle. Following myocardial necrosis associated with myocardial infarction (MI), myoglobin is one of the first markers to rise above normal levels. Studies with human subjects have shown that myoglobin increases measurably above baseline within 2-4 hours post-infarct, peaking at 9-12 hours, and returning to baseline within 24-36 hours. In the absence of skeletal muscle trauma or other factors associated with a noncardiac related increase in circulating myoglobin, myoglobin may be used as a marker for MI. Similarly, in the absence of cardiac damage, myoglobin may be used as a marker of skeletal muscle injury.
    Pathways
    Brown Fat Cell Differentiation
Sie sind hier:
Kundenservice