IDE ELISA Kit

Produktnummer ABIN955883

Produktdetails IDE ELISA Kit

Target: IDE (Insulin-Degrading Enzyme (IDE))

Reaktivität: Human

Nachweismethode: Colorimetric

Methodentyp: Sandwich ELISA

Detektionsbereich: 0.78-50 ng/mL

Untere Nachweisgrenze: 0.78 ng/mL

Applikation: ELISA

Verwendungszweck: This ELISA kit is a sandwich enzyme immunoassay for the in vitro quantitative measurement of human IDE in serum, plasma and other biological fluids.

Analytische Methode: Quantitative

Spezifität: This assay has high sensitivity and excellent specificity for detection of Human IDE. No significant cross- reactivity or interference was observed.

Sensitivität: The minimum detectable dose of Human IDE is typically less than 0.195 ng/mL.
The Sensitivity of this assay, or Lower Limit of Detection (LLD) was defined as the lowest protein concentration that could be differentiated from zero. It was determined by the mean O.D. value of 20 replicates of the zero calibrator plus three standard deviations.

Produktmerkmale: The microtiter plate provided in this kit has been pre-coated with an antibody specific to IDE. Calibrators and samples are then added to the appropriate microtiter plate wells with a biotin-conjugated polyclonal antibody preparation specific for IDE. Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. Then the TMB substrate solution is added to each well. Only those wells that contain IDE, biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of a sulfuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450 nm +/- 2 nm. The concentration of IDE in the samples is then determined by comparing the O.D. of the samples to the calibration curve.

Bestandteile: Pre-coated, ready to use 96-well plate (1x)
Calibrator (lyophilized) (2x)
Calibrator Diluent (1 x 20 mL)
Detection Reagent A (1 x 120 µL)
Detection Reagent B (1 x 120 µL)
Assay Diluent A (2X concentrate) (1 x 6 mL)
Assay Diluent B (2X concentrate) (1 x 6 mL)
TMB Substrate (1 x 9 mL)
Stop Solution (1 x 6 mL)
Wash Buffer (30X concentrate) (1 x 20 mL)
Plate sealer for 96 wells (4x).

Benötigtes Material: 1. Microplate reader with 450 +/- 10 nm filter.
2. Precision single and multi-channel pipettes and disposable tips.
3. Eppendorf Tubes for diluting samples.
4. Deionized or distilled water.
5. Absorbent paper for blotting the microtiter plate.
6. Container for Wash Solution

Anwendungsinformationen

Kommentare:

The calibration curve concentrations used for the ELISA's were 50, 25, 12.5, 6.25, 3.12, 1.56, 0.78 ng/mL.

Plattentyp: Pre-coated

Ergebnisberechnung:

Average the duplicate readings for each calibrator, control, and sample and subtract the average zero calibrator optical density. Create a calibration curve by reducing the data using computer software capable of generating a four parameter logistic (4-PL) curve-fit. As an alternative, construct a calibration curve by plotting the mean absorbance for each calibrator on the y-axis against the concentration on the x-axis and draw a best fit curve through the points on the graph. The data may be linearized by plotting the log of the IDE concentrations versus the log of the O.D. and the best fit line can be determined by regression analysis. This procedure will produce an adequate but less precise fit of the data. It is recommended to use some related software to do this calculation. If samples have been diluted, the concentration read from the calibration curve must be multiplied by the dilution factor.

Beschränkungen: Nur für Forschungszwecke einsetzbar

Handhabung

Lagerung: -20 °C

Informationen zur Lagerung: All reagents should be stored according to their label. The Calibrators, Detection Reagent A, Detection Reagent B and the 96-well plate should be stored at -20° C upon receipt. The unused strips should be kept in a sealed bag with the desiccant provided to minimize exposure to damp air. Opened test kits will remain stable until the expiration date, provided they are stored as above.

Haltbarkeit: The expiry date is stated on the label.

Details zu IDE

Target: IDE (Insulin-Degrading Enzyme (IDE))

Andere Bezeichnung: Insulin Degrading Enzyme (IDE) (IDE Produkte)

Synonyme: zgc:162603 ELISA Kit, IDE ELISA Kit, 1300012G03Rik ELISA Kit, 4833415K22Rik ELISA Kit, AA675336 ELISA Kit, AI507533 ELISA Kit, INSDEGM ELISA Kit, INSULYSIN ELISA Kit, insulin degrading enzyme ELISA Kit, insulin-degrading enzyme ELISA Kit, metallopeptidase ELISA Kit, IDE ELISA Kit, ide ELISA Kit, LOC591315 ELISA Kit, CC1G_01115 ELISA Kit, Bm1_26615 ELISA Kit, PTRG_10875 ELISA Kit, SJAG_01430 ELISA Kit, EBI_21700 ELISA Kit, VDBG_06702 ELISA Kit, LOAG_08082 ELISA Kit, PGTG_04982 ELISA Kit, Tsp_00424 ELISA Kit, Ide ELISA Kit

Pathways: SARS-CoV-2 Protein Interaktom