TRIAP1 ELISA Kit

Produktnummer ABIN8091910

Human TRIAP1 ELISA Kit, Colorimetric Assay für die Quantifizierung von Human TRIAP1.

Kurzübersicht für TRIAP1 ELISA Kit (ABIN8091910)

Target: TRIAP1 (TP53 Regulated Inhibitor of Apoptosis 1 (TRIAP1))

Reaktivität: Human

Nachweismethode: Colorimetric

Methodentyp: Sandwich ELISA

Detektionsbereich: 0.156 ng/mL - 10 ng/mL

Applikation: ELISA

Proben: Cell Culture Supernatant, Cell Samples, Plasma, Serum, Tissue Lysate

Produktdetails TRIAP1 ELISA Kit

Untere Nachweisgrenze: 0.156 ng/mL

Verwendungszweck: Human TRIAP1 (TP53-regulated inhibitor of apoptosis 1) ELISA Kit

Analytische Methode: Quantitative

Spezifität: Specifically binds with TRIAP1 , no obvious cross reaction with other analogues.

Sensitivität: 0.094 ng/mL

Bestandteile:

• ELISA Microplate(Dismountable)
• Lyophilized Standard
• Biotin-labeled Antibody
• HRP-Streptavidin Conjugate(SABC
• 100X)
• TMB Substrate
• Sample Dilution Buffer
• Stop Solution
• Plate Sealer
• Product Description

Benötigtes Material:

• Microplate reader (wavelength: 450nm)
• 37 °C incubator (CO2 incubator for cell culture is not recommenced.)
• Automated plate washer or multi-channel pipette/5 mL pipettor
• Precision single (0.5-10μL
• 5-50μL
• 20-200μL
• 200-1000μL) and multi-channel pipette with disposable tips(Calibration is required before use.)
• Sterile tubes and Eppendorf tubes with disposable tips
• Absorbent paper and loading slot
• Deionized or distilled water

Anwendungsinformationen

Applikationshinweise: Optimal working dilution should be determined by the investigator.

Kommentare:

Sandwich ELISA, Double Antibody

Probenmenge: 100 μL

Testdauer: 4 h

Plattentyp: Pre-coated

Protokoll: Step 1: Add 100 µL standard or sample into each well, seal the plate and statically incubate for 90 minutes at 37 °C. Washing: Wash the plate twice without immersing. Step 2: Add 100 µL biotin-antibody working solution, seal the plate and statically incubate for 60 minutes at 37 °C. Washing: Wash the plate three times and immerse for 1 min each time. Step 3: Add 100 µL HRP-Streptavidin Conjugate (SABC) working solution, seal the plate and statically incubate for 30 minutes at 37 °C. Washing: Wash the plate five times and immerse for 1 min each time. Step 4: Add 90 µL TMB substrate solution, seal the plate and statically incubate for 10-20 minutes at 37 °C. (Accurate TMB visualization control is required.) Step 5: Add 50 µL stop solution. Read at 450nm immediately and calculate.

Beschränkungen: Nur für Forschungszwecke einsetzbar

Handhabung

Handhabung: Avoid direct light exposure to antibody solutions

Lagerung: 4 °C

Informationen zur Lagerung: Store sealed Kit at 2-8° C. Do Not Cryopreserve. Store ELISA Microplate for 1 month at 2-8°C, Store for 12 month at -20°C. Put the leftover strips into a sealed foil bag with the desiccant

Haltbarkeit: 12 months

Details zu TRIAP1

Target: TRIAP1 (TP53 Regulated Inhibitor of Apoptosis 1 (TRIAP1))

Andere Bezeichnung: TRIAP1

Hintergrund: TP53-regulated inhibitor of apoptosis 1, Protein 15E1.1, WF-1, p53-inducible cell-survival factor, p53CSV, TRIAP1, 15E1.1

UniProt: O43715

Pathways: Negative Regulation of intrinsic apoptotic Signaling