Factor VII ELISA Kit

Produktnummer ABIN8089825

Ratte Factor VII ELISA Kit, Colorimetric Assay für die Quantifizierung von Ratte Factor VII.

Kurzübersicht für Factor VII ELISA Kit (ABIN8089825)

Target: Factor VII (F7) (Coagulation Factor VII (F7))

Reaktivität: Ratte

Nachweismethode: Colorimetric

Methodentyp: Sandwich ELISA

Detektionsbereich: 1.25 ng/mL - 80 ng/mL

Applikation: ELISA

Proben: Cell Culture Supernatant, Cell Samples, Plasma, Serum, Tissue Lysate

Produktdetails Factor VII ELISA Kit

Untere Nachweisgrenze: 1.25 ng/mL

Verwendungszweck: Rat F7 (Coagulation Factor VII) ELISA Kit

Analytische Methode: Quantitative

Spezifität: Specifically binds with F7 , no obvious cross reaction with other analogues.

Sensitivität: 0.75 ng/mL

Bestandteile:

• ELISA Microplate(Dismountable)
• Lyophilized Standard
• Biotin-labeled Antibody
• HRP-Streptavidin Conjugate(SABC
• 100X)
• TMB Substrate
• Sample Dilution Buffer
• Stop Solution
• Plate Sealer
• Product Description

Benötigtes Material:

• Microplate reader (wavelength: 450nm)
• 37 °C incubator (CO2 incubator for cell culture is not recommenced.)
• Automated plate washer or multi-channel pipette/5 mL pipettor
• Precision single (0.5-10μL
• 5-50μL
• 20-200μL
• 200-1000μL) and multi-channel pipette with disposable tips(Calibration is required before use.)
• Sterile tubes and Eppendorf tubes with disposable tips
• Absorbent paper and loading slot
• Deionized or distilled water

Anwendungsinformationen

Applikationshinweise: Optimal working dilution should be determined by the investigator.

Kommentare:

Sandwich ELISA, Double Antibody

Probenmenge: 100 μL

Testdauer: 4 h

Plattentyp: Pre-coated

Protokoll: Step 1: Add 100 µL standard or sample into each well, seal the plate and statically incubate for 90 minutes at 37 °C. Washing: Wash the plate twice without immersing. Step 2: Add 100 µL biotin-antibody working solution, seal the plate and statically incubate for 60 minutes at 37 °C. Washing: Wash the plate three times and immerse for 1 min each time. Step 3: Add 100 µL HRP-Streptavidin Conjugate (SABC) working solution, seal the plate and statically incubate for 30 minutes at 37 °C. Washing: Wash the plate five times and immerse for 1 min each time. Step 4: Add 90 µL TMB substrate solution, seal the plate and statically incubate for 10-20 minutes at 37 °C. (Accurate TMB visualization control is required.) Step 5: Add 50 µL stop solution. Read at 450nm immediately and calculate.

Beschränkungen: Nur für Forschungszwecke einsetzbar

Handhabung

Handhabung: Avoid direct light exposure to antibody solutions

Lagerung: 4 °C

Informationen zur Lagerung: Store sealed Kit at 2-8° C. Do Not Cryopreserve. Store ELISA Microplate for 1 month at 2-8°C, Store for 12 month at -20°C. Put the leftover strips into a sealed foil bag with the desiccant

Haltbarkeit: 12 months

Details zu Factor VII

Target: Factor VII (F7) (Coagulation Factor VII (F7))

Andere Bezeichnung: F7

Hintergrund: Coagulation factor VII, Proconvertin, Serum prothrombin conversion accelerator, SPCA, Factor VII light chain, Factor VII heavy chain, F7

UniProt: Q8K3U6

Pathways: Response to Growth Hormone Stimulus, Platelet-derived growth Factor Receptor Signaling