LRP4 ELISA Kit

Produktnummer ABIN8056173

Dieses Colorimetric ELISA kit dient der quantitativen Messung von Human LRP4.

Kurzübersicht für LRP4 ELISA Kit (ABIN8056173)

Target: LRP4 (Low Density Lipoprotein Receptor-Related Protein 4 (LRP4))

Reaktivität: Human

Nachweismethode: Colorimetric

Methodentyp: Indirect ELISA

Detektionsbereich: 3.12 ng/mL - 200 ng/mL

Applikation: ELISA

Proben: Plasma, Serum

Produktdetails LRP4 ELISA Kit

Untere Nachweisgrenze: 3.12 ng/mL

Verwendungszweck: ELISA Kit for Anti-Low Density Lipoprotein Receptor Related Protein 4 Antibody (Anti-LRP4)

Analytische Methode: Quantitative

Spezifität:

This assay has high sensitivity and excellent specificity for detection of Anti-Low Density Lipoprotein Receptor Related Protein 4 Antibody (Anti-LRP4).
No significant cross-reactivity or interference between Anti-Low Density Lipoprotein Receptor Related Protein 4 Antibody (Anti-LRP4) and analogues was observed.

Sensitivität: < 1.17 ng/mL

Bestandteile:

• Pre-coated, 96-well strip plate
• Plate sealer
• Standard
• Standard Diluent
• Detection Reagent A
• Assay Diluent A
• TMB Substrate
• Stop Solution
• Wash Buffer (30X)
• Instruction manual

Benötigtes Material:

• Microplate reader with 450 ± 10nm filter.
• Precision single or multi-channel pipettes and disposable tips.
• Eppendorf Tubes for diluting samples.
• Deionized or distilled water.
• Absorbent paper for blotting the microtiter plate.
• Container for Wash Solution

Anwendungsinformationen

Probenmenge: 100 μL

Testdauer: 2.5 h

Plattentyp: Pre-coated

Protokoll: 1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 2 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 5 times;
5. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
6. Add 50µL Stop Solution. Read at 450nm immediately.

Testpräzision:

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Anti-Low Density Lipoprotein Receptor Related Protein 4 Antibody (Anti-LRP4) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Anti-Low Density Lipoprotein Receptor Related Protein 4 Antibody (Anti-LRP4) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Beschränkungen: Nur für Forschungszwecke einsetzbar

Handhabung

Handhabung:

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Lagerung: 4 °C,-20 °C

Informationen zur Lagerung:

• For unopened kit: All the reagents should be kept according to the labels on vials. The Standard, Detection Reagent A, Detection Reagent B and the 96-well strip plate should be stored at -20°C upon receipt while the others should be at 4°C.
• For opened kit: When the kit is opened, the remaining reagents still need to be stored according to the above storage condition. Besides, please return the unused wells to the foil pouch containing the desiccant pack, and reseal along entire edge of zip-seal.
  Note: It is highly recommended to use the remaining reagents within 1 month provided this is within the expiration date of the kit.
• For ELISA kit, 1 day storage at 37°C can be considered as 2 months at 4°C, which means 3 days at 37°C equaling 6 months at 4°C.

Haltbarkeit: 6 months

Details zu LRP4

Target: LRP4 (Low Density Lipoprotein Receptor-Related Protein 4 (LRP4))

Andere Bezeichnung: Low Density Lipoprotein Receptor Related Protein 4

Hintergrund: MEGF7, LRP10, Multiple epidermal growth factor-like domains 7

UniProt: O75096

Pathways: Skeletal Muscle Fiber Development