TGF-beta ELISA Kit
Kurzübersicht für TGF-beta ELISA Kit (ABIN7672321)
Target
Alle TGF-beta (TGFb) ELISA Kits anzeigenReaktivität
Nachweismethode
Methodentyp
Detektionsbereich
Applikation
Proben
Güteklasse
-
-
Untere Nachweisgrenze
- 31.25 pg/mL
-
Verwendungszweck
- Hamster TGF-β (Transforming Growth Factor beta) QuickTest ELISA Kit
-
Analytische Methode
- Quantitative
-
Spezifität
- Specifically binds with TGF-β , no obvious cross reaction with other analogues.
-
Sensitivität
- 18.75 pg/mL
-
Benötigtes Material
-
- Microplate reader (wavelength: 450nm)
- 37 °C incubator (CO2 incubator for cell culture is not recommenced.)
- Automated plate washer or multi-channel pipette/5 mL pipettor
- Precision single (0.5-10μL
- 5-50μL
- 20-200μL
- 200-1000μL) and multi-channel pipette with disposable tips(Calibration is required before use.)
- Sterile tubes and Eppendorf tubes with disposable tips
- Absorbent paper and loading slot
- Deionized or distilled water
-
-
-
-
Applikationshinweise
- Optimal working dilution should be determined by the investigator.
-
Kommentare
-
Sandwich ELISA, Double Antibody
-
Probenmenge
- 50 μL
-
Testdauer
- 2 h
-
Plattentyp
- Pre-coated
-
Protokoll
- Step 1: Take out the required plate wells, add 50 µL Cap/Det Ab into each well, then add 50 µL Standard or Sample into individual well. (When adding standard or sample, the disposable tip lightly touches the liquid level. Change the disposable tips for different samples and standards.) Gently tap the plate for 10s to ensure thorough mixing then static incubate for 60 minutes at 37 °C. Washing: Wash the plate twice without immersion. Step 2: Add 100 µL HRP-Streptavidin (orange) into each well, seal the plate and static incubate for 30 minutes at 37 °C. Washing: Wash the plate five times without immersion. Step 3: Add 90 µL TMB substrate solution, seal the plate and static incubate for 10-20 minutes at 37 °C. (Accurate TMB visualization control is required.) Step 4: Add 50 µL stop solution. Read at 450nm immediately and calculate.
-
Testdurchführung
-
- Take out the required strips, add 50 µL Cap/Det Ab into each well, then add 50 µL Standard or Sample into relevant well. (When adding standard or sample, the disposable tip lightly touches the liquid level. Change the disposable tips for different samples and standards.) Gently tap the plate for 10s to ensure complete mixing then statically incubate for 60 minutes at 37 °C.
- Wash the plate twice without immersion.
- Add 100 µL HRP-Streptavidin (orange) into each well, seal the plate and statically incubate for 30 minutes at 37 °C.
- Wash the plate five times without immersion.
- Add 90 µL TMB substrate solution, seal the plate and statically incubate for 10-20 minutes at 37 °C (Accurate TMB visualization control is required.).
- Add 50 µL stop solution. Read at 450nm immediately and calculate.
-
Beschränkungen
- Nur für Forschungszwecke einsetzbar
-
-
-
Handhabung
- Avoid direct light exposure to antibody solutions
-
Lagerung
- 4 °C
-
Informationen zur Lagerung
- Store sealed Kit at 2-8° C. Do Not Cryopreserve. Store ELISA Microplate for 1 month at 2-8°C, Store for 12 month at -20°C. Put the leftover strips into a sealed foil bag with the desiccant
-
Haltbarkeit
- 12 months
-
-
- TGF-beta (TGFb)
-
Andere Bezeichnung
- TGF-beta
-
Hintergrund
- Transforming growth factor beta-1 proprotein, Latency-associated peptide, LAP, Transforming growth factor beta-1, TGF-beta-1, TGFB1, TGFB
-
UniProt
- A0A3L7H5P2
-
Pathways
- EGFR Signaling Pathway, Cellular Response to Molecule of Bacterial Origin, Stem Cell Maintenance, Glycosaminoglycan Metabolic Process, Regulation of Muscle Cell Differentiation, Cell-Cell Junction Organization, Ribonucleoside Biosynthetic Process, Skeletal Muscle Fiber Development, Regulation of Carbohydrate Metabolic Process, Protein targeting to Nucleus
Target Alle TGF-beta (TGFb) ELISA Kits anzeigen
-