FAIM3 ELISA Kit

Produktnummer ABIN7671357

Dieses Colorimetric ELISA kit dient der quantitativen Messung von Human FAIM3.

Kurzübersicht für FAIM3 ELISA Kit (ABIN7671357)

Target: FAIM3 (Fas Apoptotic Inhibitory Molecule 3 (FAIM3))

Reaktivität: Human

Nachweismethode: Colorimetric

Methodentyp: Sandwich ELISA

Detektionsbereich: 0.156 ng/mL - 10 ng/mL

Applikation: ELISA

Proben: Biological Fluids, Cell Culture Supernatant, Cell Lysate, Plasma, Serum, Tissue Lysate

Güteklasse: Quick

Produktdetails FAIM3 ELISA Kit

Untere Nachweisgrenze: 0.156 ng/mL

Verwendungszweck: Human FAIM3 (Fas Apoptotic Inhibitory Molecule 3) QuickTest ELISA Kit

Analytische Methode: Quantitative

Spezifität: Specifically binds with FAIM3 , no obvious cross reaction with other analogues.

Sensitivität: 0.094 ng/mL

Bestandteile:

• ELISA Microplate(Dismountable)
• Lyophilized Standard
• Cap/Det Ab (Ready to use
• blue)
• TMB Substrate
• Sample Dilution Buffer
• Stop Solution
• Plate Sealer
• Product Description

Benötigtes Material:

• Microplate reader (wavelength: 450nm)
• 37 °C incubator (CO2 incubator for cell culture is not recommenced.)
• Automated plate washer or multi-channel pipette/5 mL pipettor
• Precision single (0.5-10μL
• 5-50μL
• 20-200μL
• 200-1000μL) and multi-channel pipette with disposable tips(Calibration is required before use.)
• Sterile tubes and Eppendorf tubes with disposable tips
• Absorbent paper and loading slot
• Deionized or distilled water

Anwendungsinformationen

Applikationshinweise: Optimal working dilution should be determined by the investigator.

Kommentare:

Sandwich ELISA, Double Antibody

Probenmenge: 50 μL

Testdauer: 2 h

Plattentyp: Pre-coated

Protokoll: Step 1: Take out the required plate wells, add 50 µL Cap/Det Ab into each well, then add 50 µL Standard or Sample into individual well. (When adding standard or sample, the disposable tip lightly touches the liquid level. Change the disposable tips for different samples and standards.) Gently tap the plate for 10s to ensure thorough mixing then static incubate for 60 minutes at 37 °C. Washing: Wash the plate twice without immersion. Step 2: Add 100 µL HRP-Streptavidin (orange) into each well, seal the plate and static incubate for 30 minutes at 37 °C. Washing: Wash the plate five times without immersion. Step 3: Add 90 µL TMB substrate solution, seal the plate and static incubate for 10-20 minutes at 37 °C. (Accurate TMB visualization control is required.) Step 4: Add 50 µL stop solution. Read at 450nm immediately and calculate.

Testdurchführung:

1. Take out the required strips, add 50 µL Cap/Det Ab into each well, then add 50 µL Standard or Sample into relevant well. (When adding standard or sample, the disposable tip lightly touches the liquid level. Change the disposable tips for different samples and standards.) Gently tap the plate for 10s to ensure complete mixing then statically incubate for 60 minutes at 37 °C.
2. Wash the plate twice without immersion.
3. Add 100 µL HRP-Streptavidin (orange) into each well, seal the plate and statically incubate for 30 minutes at 37 °C.
4. Wash the plate five times without immersion.
5. Add 90 µL TMB substrate solution, seal the plate and statically incubate for 10-20 minutes at 37 °C (Accurate TMB visualization control is required.).
6. Add 50 µL stop solution. Read at 450nm immediately and calculate.

Beschränkungen: Nur für Forschungszwecke einsetzbar

Handhabung

Handhabung: Avoid direct light exposure to antibody solutions

Lagerung: 4 °C

Informationen zur Lagerung: Store sealed Kit at 2-8° C. Do Not Cryopreserve. Store ELISA Microplate for 1 month at 2-8°C, Store for 12 month at -20°C. Put the leftover strips into a sealed foil bag with the desiccant

Haltbarkeit: 12 months

Details zu FAIM3

Target: FAIM3 (Fas Apoptotic Inhibitory Molecule 3 (FAIM3))

Andere Bezeichnung: FAIM3

Hintergrund: Immunoglobulin mu Fc receptor, IgM FcR, Fas apoptotic inhibitory molecule 3, FAIM3, Regulator of Fas-induced apoptosis Toso, FCMR, FAIM3, TOSO

UniProt: O60667