SARS-CoV-2 Spike ELISA Kit

Produktnummer ABIN7425327

SARS CoV-2 Omicron und SARS Coronavirus-2 (SARS-CoV-2) SARS-CoV-2 Spike ELISA-Kit Colorimetric-Assay zur Quantifizierung von SARS CoV-2 Omicron und SARS Coronavirus-2 (SARS-CoV-2) SARS-CoV-2 Spike.

Kurzübersicht für SARS-CoV-2 Spike ELISA Kit (ABIN7425327)

Target: SARS-CoV-2 Spike

Bindungsspezifität: RBD

Reaktivität: SARS CoV-2 Omicron, SARS Coronavirus-2 (SARS-CoV-2)

Nachweismethode: Colorimetric

Methodentyp: Sandwich ELISA

Detektionsbereich: 1.56 - 50 ng/mL

Applikation: ELISA

Produktdetails SARS-CoV-2 Spike ELISA Kit

Untere Nachweisgrenze: 1.56 ng/mL

Verwendungszweck: This kit is developed for detecting SARS-CoV-2 Spike RBD (XBB.1.5) in the sample, simultaneously can detect Omicron (BA.2 and BA.4 & BA.5 and BQ.1.1)

Analytische Methode: Quantitative

Spezifität: This kit is developed for detecting SARS-CoV-2 Spike RBD (XBB.1.5) in the sample, simultaneously can detect Omicron (BA.2 and BA.4 & BA.5 and BQ.1.1).

Produktmerkmale: This assay kit is used to measure the levels of SARS-CoV-2 Spike RBD (XBB.1.5) by employing a standard sandwich-ELISA format. The microplate in the kit has been pre-coated with Anti-SARS-CoV-2 Spike RBD Antibody. First add the standard samples provided in kit and your samples to the plate, incubate and wash the wells. Then add the Biotin-Anti-SARS-CoV-2 Spike RBD Antibody to the plate, incubate and wash the wells. Next add Streptavidin-HRP to the plate, incubate and wash the wells. Lastly load the substrate into the wells and monitor color development in proportion with the amount of Spike RBD (XBB.1.5) present. The reaction is stopped by the additionof a stop solution and the intensity of the absorbance can be measured at 450 nm and 630 nm. The OD Value reflects the amount of Spike RBD bound.

Bestandteile:

• Pre-coated Anti-SARS-CoV-2 Spike RBD Antibody Microplate
• SARS-CoV-2 Spike RBD (XBB.1.5)
• Biotin-Anti-SARS-CoV-2 Spike RBD Antibody
• Streptavidin-HRP
• 10 x Washing Buffer
• Dilution Buffer
• Substrate Solution
• Stop Solution

Benötigtes Material: Single or dual wavelength microplate reader with 450 nm and 630 nm filter, Centrifuge, 37ºC Incubator, 10 µL, 200 µL and 1000 µL precision pipettes, 10 µL, 200 µL and 1000 µL pipette tips, Multichannel pipettes, Tubes, Graduated cylinder to prepare Wash Solution, Deionized or distilled water to dilute 10× Washing Buffer

Anwendungsinformationen

Plattentyp: Pre-coated

Protokoll:

1. Bring all reagents and samples to room temperature (20℃-25℃) before use.
2. Add your sample to the plate, take the SARS-CoV-2 Spike RBD as Control sample. The samples and Control sample are diluted by Dilution Buffer.
3. Add the Secondary antibody biotin-Anti-SARS-CoV-2 Spike RBD Antibody diluted by Dilution Buffer to the plate.
4. Add the diluted Streptavidin-HRP to the plate.
5. Wash the plate and add TMB or other colorimetric HRP substrate.
6. Stop the substrate reaction by adding diluted acid. Absorbance (OD) is calculated as the absorbance at 450 nm minus the absorbance at 650 nm to remove background prior to statistical analysis. The OD Value reflects the amount of protein bound.

Beschränkungen: Nur für Forschungszwecke einsetzbar

Handhabung

Lagerung: 4 °C

Informationen zur Lagerung: The unopened kit is stable for 12 months from the date of manufacture if stored at 2°C to 8°C.
The opened kit should be stored per components table. The shelf life is 30 days from the date of opening.

Haltbarkeit: 6 months

Details zu SARS-CoV-2 Spike

Target: SARS-CoV-2 Spike

Hintergrund: The newly identified Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) has posed a serious threat to human health. A rapid and effective assay kit detecting the levels of SARS-CoV-2 Spike RBD is urgently needed to accelerate the development of COVID-19 vaccines.