SF3B3 ELISA Kit

Produktnummer ABIN5674722

Human SF3B3 ELISA-Kit Colorimetric-Assay zur Quantifizierung von Human SF3B3.

Kurzübersicht für SF3B3 ELISA Kit (ABIN5674722)

Target: SF3B3 (Splicing Factor 3b, Subunit 3, 130kDa (SF3B3))

Reaktivität: Human

Nachweismethode: Colorimetric

Methodentyp: Sandwich ELISA

Detektionsbereich: 0.156 ng/mL - 10 ng/mL

Applikation: ELISA

Proben: Cell Lysate, Tissue Homogenate

Produktdetails SF3B3 ELISA Kit

Untere Nachweisgrenze: 0.156 ng/mL

Analytische Methode: Quantitative

Sensitivität: 0065 ng/mL

Bestandteile: Pre-coated, ready to use 96-well strip plate
Standard (freeze dried)
Standard Diluent
Detection Reagent A
Detection Reagent B
Assay Diluent A
Assay Diluent B
TMB Substhumane
Stop Solution
Wash Buffer(30 x concenthumane)
Plate sealer for 96 wells
Instruction manual

Benötigtes Material: 1. Microplate reader with 450 ± 10nm filter.
2. Precision single or multi-channel pipettes and disposable tips.
3. Eppendorf Tubes for diluting samples.
4. Deionized or distilled water.
5. Absorbent paper for blotting the microtiter plate.
6. Container for Wash Solution.

Anwendungsinformationen

Applikationshinweise: Optimal working dilution should be determined by the investigator.

Testdauer: 1 - 4.5 h

Plattentyp: Pre-coated

Protokoll: 1. Prepare all reagents, samples and standards
2. Add 100µL standard or sample to each well. Incubate 2 hours at 37℃
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37℃
4. Aspirate and wash 3 times
5. Add 100µL prepared Detection Reagent B. Incubate 1 hour at 37℃
6. Aspirate and wash 5 times
7. Add 90µL Substrate Solution. Incubate 15-25 minutes at 37℃
8. Add 50µL Stop Solution. Read at 450nm immediately.

Beschränkungen: Nur für Forschungszwecke einsetzbar

Handhabung

Lagerung: 4 °C

Haltbarkeit: 12 months

Details zu SF3B3

Target: SF3B3 (Splicing Factor 3b, Subunit 3, 130kDa (SF3B3))

Andere Bezeichnung: Splicing Factor 3B Subunit 3 (SF3B3)

Hintergrund: Alternative name: RSE1, SAP130, SF3b130, STAF130, Spliceosome-associated protein 130, Pre-mRNA-splicing factor SF3b 130 kDa subunit

Gen-ID: 23450

UniProt: Q15393