Selectin E/CD62e CLIA Kit

Produktnummer ABIN5658666

Produktdetails Selectin E/CD62e CLIA Kit

Target: Selectin E/CD62e (SELE) (Selectin E (SELE))

Reaktivität: Human

Nachweismethode: Chemiluminescent

Methodentyp: Sandwich ELISA

Detektionsbereich: 6.86 pg/mL - 5000 pg/mL

Untere Nachweisgrenze: 6.86 pg/mL

Applikation: ELISA

Proben: Cell Culture Supernatant, Cell Lysate, Plasma, Serum, Tissue Homogenate

Analytische Methode: Quantitative

Spezifität: This assay has high sensitivity and excellent specificity for detection of Selectin, Endothelium (SELE). No significant cross-reactivity or interference between Selectin, Endothelium (SELE) and analogues was observed.

Sensitivität: 2.63 pg/mL

Anwendungsinformationen

Kommentare:

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5 % within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Testdauer: 2 - 3 h

Plattentyp: Pre-coated

Protokoll: The microplate provided in this kit has been pre-coated with an antibody specific to Selectin, Endothelium (SELE). Standards or samples are then added to the appropriate microplate wells with a biotin-conjugated antibody specific to Selectin, Endothelium (SELE). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. Then the mixture of substrate A and B is added to generate glow light emission kinetics. Upon plate development, the intensity of the emitted light is proportional to the Selectin, Endothelium (SELE) level in the sample or standard.,

Testpräzision: Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Selectin, Endothelium (SELE) were tested 20 times on one plate, respectively
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Selectin, Endothelium (SELE) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Beschränkungen: Nur für Forschungszwecke einsetzbar

Handhabung

Handhabung: Do not allow to contact skin or eyes. Calibrators, controls and specimen samples should be assayed in duplicate. Once the procedure has been started, all steps should be completed without interruption.

Lagerung: 4 °C,-20 °C

Informationen zur Lagerung: -20°C. Bring all reagents to room temperature before beginning test. The kit may be stored at 4°C for immediate use within two days upon arrival. Reseal any unused strips with desiccant pack. Minimize freeze/thaw cycles.

Haltbarkeit: 4-8 months

Antigendetails

Target: Selectin E/CD62e (SELE) (Selectin E (SELE))

Andere Bezeichnung: Selectin, Endothelium (SELE Produkte)

Synonyme: SELE CLIA Kit, CD62E CLIA Kit, ELAM CLIA Kit, ELAM1 CLIA Kit, ESEL CLIA Kit, LECAM2 CLIA Kit, E-selectin CLIA Kit, Elam CLIA Kit, selectin E CLIA Kit, selectin, endothelial cell CLIA Kit, SELE CLIA Kit, Sele CLIA Kit

Hintergrund:

Gene Name: Selectin, Endothelium

Gene Aliases: CD62E, CD62-E, E-Selectin, ELAM, ELAM1, ESEL, SEL-E, E-LAM, E-LAM1, E-SEL, LECAM2, Endothelial Leukocyte Adhesion Molecule 1, CD62 Antigen-Like Family Member E

Gen-ID: 6401

UniProt: P16581

Pathways: Thromboxane A2 Receptor Signaling