PVALB ELISA Kit

Produktnummer ABIN5657645

Ratte PVALB ELISA Kit, Colorimetric Assay für die Quantifizierung von Ratte PVALB.

Kurzübersicht für PVALB ELISA Kit (ABIN5657645)

Target: PVALB (Parvalbumin (PVALB))

Reaktivität: Ratte

Nachweismethode: Colorimetric

Methodentyp: Sandwich ELISA

Detektionsbereich: 0.78 ng/mL - 50 ng/mL

Applikation: ELISA

Proben: Cell Culture Supernatant, Cell Lysate, Plasma, Serum, Tissue Homogenate

Produktdetails PVALB ELISA Kit

Untere Nachweisgrenze: 0.78 ng/mL

Verwendungszweck: Rat Parvalbumin (PVALB) ELISA Kit for detecting PVALB in serum, plasma, tissue homogenates, cell lysates, cell culture supernates

Analytische Methode: Quantitative

Spezifität: This assay has high sensitivity and excellent specificity for detection of Parvalbumin (PVALB). No significant cross-reactivity or interference between Parvalbumin (PVALB) and analogues was observed.

Sensitivität: 0.31 ng/mL

Bestandteile:

• Pre-coated, ready to use 96-well strip plate
• Standar
• Detection Reagent A
• Detection Reagent B
• TMB Substrate
• Stop Solution
• Assay Diluent A
• Assay Diluent B
• Wash Buffer (30x concentrate)
• Standard Diluent
• Plate Sealer
• Instruction Manual

Benötigtes Material:

• Microplate Reader with 450 nm filter
• Single or multi-channel pipettes with high precision and disposable tips
• Microcentrifuge tubes
• Deionized or distilled watter
• Absorbent paper for blotting the microplate
• Container for wash solution
• 0.01 M (or 1x) Phosphate Buffered Saline (PBS), ph 7.0-7.2

Anwendungsinformationen

Applikationshinweise: Optimal working dilution should be determined by the investigator.

Kommentare:

This product is tested and assembled before shipping to ensure that it meets its quality specifications. All kits are tested to confirm that they fall within their defined Inter- and Intra- assay coefficient of variation.

Probenmenge: 100 μL

Testdauer: 3 h

Plattentyp: Pre-coated

Protokoll: The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Parvalbumin (PVALB). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Parvalbumin (PVALB). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Parvalbumin (PVALB), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Parvalbumin (PVALB) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Testpräzision: Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Parvalbumin (PVALB) were tested 20 times on one plate, respectively
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Parvalbumin (PVALB) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Beschränkungen: Nur für Forschungszwecke einsetzbar

Handhabung

Handhabung: The Stop Solution is acidic. Do not allow to contact skin or eyes. Calibrators, controls and specimen samples should be assayed in duplicate. Once the procedure has been started, all steps should be completed without interruption.

Lagerung: 4 °C,-20 °C

Informationen zur Lagerung: -20°C. Bring all reagents to room temperature before beginning test. The kit may be stored at 4°C for immediate use within two days upon arrival. Reseal any unused strips with desiccant pack. Minimize freeze/thaw cycles.

Haltbarkeit: 12 months

Details zu PVALB

Target: PVALB (Parvalbumin (PVALB))

Andere Bezeichnung: Parvalbumin

Hintergrund: Gene Aliases:

Gen-ID: 25269

UniProt: P02625