G-CSF ELISA Kit
Kurzübersicht für G-CSF ELISA Kit (ABIN5653181)
Target
Alle G-CSF (CSF3) ELISA Kits anzeigenReaktivität
Nachweismethode
Methodentyp
Detektionsbereich
Applikation
Proben
-
-
Untere Nachweisgrenze
- 15.6 pg/mL
-
Analytische Methode
- Quantitative
-
Spezifität
- This assay has high sensitivity and excellent specificity for detection of Colony Stimulating Factor 3, Granulocyte (GCSF). No significant cross-reactivity or interference between Colony Stimulating Factor 3, Granulocyte (GCSF) and analogues was observed.
-
Sensitivität
- 6.3 pg/mL
-
-
-
-
Kommentare
-
The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5 % within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
-
Testdauer
- 3 h
-
Plattentyp
- Pre-coated
-
Protokoll
- The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Colony Stimulating Factor 3, Granulocyte (GCSF). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Colony Stimulating Factor 3, Granulocyte (GCSF). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Colony Stimulating Factor 3, Granulocyte (GCSF), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Colony Stimulating Factor 3, Granulocyte (GCSF) in the samples is then determined by comparing the O.D. of the samples to the standard curve.
-
Testpräzision
-
Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Colony Stimulating Factor 3, Granulocyte (GCSF) were tested 20 times on one plate, respectively
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Colony Stimulating Factor 3, Granulocyte (GCSF) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12% -
Beschränkungen
- Nur für Forschungszwecke einsetzbar
-
-
-
Handhabung
- The Stop Solution is acidic. Do not allow to contact skin or eyes. Calibrators, controls and specimen samples should be assayed in duplicate. Once the procedure has been started, all steps should be completed without interruption.
-
Lagerung
- 4 °C,-20 °C
-
Informationen zur Lagerung
- -20°C. Bring all reagents to room temperature before beginning test. The kit may be stored at 4°C for immediate use within two days upon arrival. Reseal any unused strips with desiccant pack. Minimize freeze/thaw cycles.
-
Haltbarkeit
- 4-8 months
-
-
- G-CSF (CSF3) (Colony Stimulating Factor 3 (Granulocyte) (CSF3))
-
Andere Bezeichnung
- Colony Stimulating Factor 3, Granulocyte
-
Hintergrund
-
Gene Name: Colony Stimulating Factor 3, Granulocyte
Gene Aliases: CSF3, G-CSF, Granulocyte Colony Stimulating Factor, Pluripoietin, Filgrastim, Lenograstim
-
Gen-ID
- 1440
-
UniProt
- P09919
-
Pathways
- Cellular Response to Molecule of Bacterial Origin, Regulation of Actin Filament Polymerization
Target Alle G-CSF (CSF3) ELISA Kits anzeigen
-