COMP CLIA Kit

Produktnummer ABIN5652626

Human COMP ELISA Kit, Chemiluminescent Assay für die Quantifizierung von Human COMP.

Kurzübersicht für COMP CLIA Kit (ABIN5652626)

Target: COMP (Cartilage Oligomeric Matrix Protein (COMP))

Reaktivität: Human

Nachweismethode: Chemiluminescent

Methodentyp: Sandwich ELISA

Detektionsbereich: 0.41 ng/mL - 300 ng/mL

Applikation: ELISA

Proben: Plasma, Serum, Tissue Homogenate

Produktdetails COMP CLIA Kit

Untere Nachweisgrenze: 0.41 ng/mL

Verwendungszweck: Human Cartilage Oligomeric Matrix Protein (COMP) CLIA Kit for detecting COMP in serum, plasma, tissue homogenates

Analytische Methode: Quantitative

Spezifität: This assay has high sensitivity and excellent specificity for detection of Cartilage Oligomeric Matrix Protein (COMP). No significant cross-reactivity or interference between Cartilage Oligomeric Matrix Protein (COMP) and analogues was observed.

Sensitivität: 0.17 ng/mL

Bestandteile:

• Pre-coated, ready to use 96-well strip plate
• Standar
• Detection Reagent A
• Detection Reagent B
• Substrate A
• Substrate B
• Assay Diluent A
• Assay Diluent B
• Wash Buffer (30x concentrate)
• Standard Diluent
• Plate Sealer
• Instruction Manual

Benötigtes Material:

• Microplate Reader with 450 nm filter
• Single or multi-channel pipettes with high precision and disposable tips
• Microcentrifuge tubes
• Deionized or distilled watter
• Absorbent paper for blotting the microplate
• Container for wash solution
• 0.01 M (or 1x) Phosphate Buffered Saline (PBS), ph 7.0-7.2

Anwendungsinformationen

Applikationshinweise: Optimal working dilution should be determined by the investigator.

Kommentare:

This product is tested and assembled before shipping to ensure that it meets its quality specifications. All kits are tested to confirm that they fall within their defined Inter- and Intra- assay coefficient of variation.

Probenmenge: 100 μL

Testdauer: 3 h

Plattentyp: Pre-coated

Protokoll: The microplate provided in this kit has been pre-coated with an antibody specific to Cartilage Oligomeric Matrix Protein (COMP). Standards or samples are then added to the appropriate microplate wells with a biotin-conjugated antibody specific to Cartilage Oligomeric Matrix Protein (COMP). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. Then the mixture of substrate A and B is added to generate glow light emission kinetics. Upon plate development, the intensity of the emitted light is proportional to the Cartilage Oligomeric Matrix Protein (COMP) level in the sample or standard.,

Testpräzision: Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Cartilage Oligomeric Matrix Protein (COMP) were tested 20 times on one plate, respectively
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Cartilage Oligomeric Matrix Protein (COMP) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Beschränkungen: Nur für Forschungszwecke einsetzbar

Handhabung

Handhabung: Do not allow to contact skin or eyes. Calibrators, controls and specimen samples should be assayed in duplicate. Once the procedure has been started, all steps should be completed without interruption.

Lagerung: 4 °C,-20 °C

Informationen zur Lagerung: -20°C. Bring all reagents to room temperature before beginning test. The kit may be stored at 4°C for immediate use within two days upon arrival. Reseal any unused strips with desiccant pack. Minimize freeze/thaw cycles.

Haltbarkeit: 12 months

Antigendetails

Target: COMP (Cartilage Oligomeric Matrix Protein (COMP))

Andere Bezeichnung: Cartilage Oligomeric Matrix Protein

Hintergrund: Gene Aliases: MED, EDM1, EPD1, PSACH, THBS5, TSP-5, Pseudoachondroplasia,Epiphyseal Dysplasia 1,Multiple, Thrombospondin 5

Gen-ID: 1311

UniProt: P49747