Salusin beta ELISA Kit

Produktnummer ABIN414557

Dieses Colorimetric ELISA kit dient der quantitativen Messung von Human Salusin beta. Es wurde in 16 Publikationen zitiert.

Kurzübersicht für Salusin beta ELISA Kit (ABIN414557)

Target: Salusin beta (TOR2A)

Reaktivität: Human

Nachweismethode: Colorimetric

Methodentyp: Competition ELISA

Detektionsbereich: 24.69 pg/mL - 2000 pg/mL

Applikation: ELISA

Proben: Plasma, Serum

Produktdetails Salusin beta ELISA Kit

Untere Nachweisgrenze: 24.69 pg/mL

Verwendungszweck: The kit is a competitive inhibition enzyme immunoassay technique for the in vitro quantitative measurement of salusin beta in Serum,Plasma,Biological Fluids

Analytische Methode: Quantitative

Spezifität:

This assay has high sensitivity and excellent specificity for detection of Salusin Beta (SALb).
No significant cross-reactivity or interference between Salusin Beta (SALb) and analogues was observed.

Kreuzreaktivität (Details): No significant cross-reactivity or interference between Salusin Beta (SALb) and analogues was observed.

Sensitivität: < 9.77 pg/mL

Bestandteile:

• Pre-coated, 96-well strip plate
• Plate sealer
• Standard
• Standard Diluent
• Detection Reagent A
• Assay Diluent A
• Detection Reagent B
• Assay Diluent B
• TMB Substrate
• Stop Solution
• Wash Buffer (30X)
• Instruction manual

Benötigtes Material:

• Microplate reader with 450 nm filter.
• Precision single or multi-channel pipettes and disposable tips.
• Eppendorf Tubes for diluting samples.
• Deionized or distilled water.
• Absorbent paper for blotting the microtiter plate.
• Container for Wash Solution

Anwendungsinformationen

Applikationshinweise:

• Limited by the current condition and scientific technology, we cannot completely conduct the comprehensive identification and analysis on the raw material provided by suppliers. So there might be some qualitative and technical risks to use the kit.
• The final experimental results will be closely related to validity of the products, operation skills of the end users and the experimental environments. Please make sure that sufficient samples are available.
• Kits from different batches may be a little different in detection range, sensitivity and color developing time.
• Do not mix or substitute reagents from one kit lot to another. Use only the reagents supplied by manufacturer.
• Protect all reagents from strong light during storage and incubation. All the bottle caps of reagents should be covered tightly to prevent the evaporation and contamination of microorganism.
• There may be some foggy substance in the wells when the plate is opened at the first time. It will not have any effect on the final assay results. Do not remove microtiter plate from the storage bag until needed.
• Wrong operations during the reagents preparation and loading, as well as incorrect parameter setting for the plate reader may lead to incorrect results. A microplate plate reader with a bandwidth of 10nm or less and an optical density range of 0-3 O.D. or greater at 450 ± 10nm wavelength is acceptable for use in absorbance measurement. Please read the instruction carefully and adjust the instrument prior to the experiment.
• Even the same operator might get different results in two separate experiments. In order to get better reproducible results, the operation of every step in the assay should be controlled. Furthermore, a preliminary experiment before assay for each batch is recommended.
• Each kit has been strictly passed Q.C test. However, results from end users might be inconsistent with our in-house data due to some unexpected transportation conditions or different lab equipments. Intra-assay variance among kits from different batches might arise from above factors, too.
• Kits from different manufacturers for the same item might produce different results, since we have not compared our products with other manufacturers.

Kommentare:

Information on standard material:
The standard might be recombinant protein or natural protein, that will depend on the specific kit. Moreover, the expression system is E.coli or yeast or mammal cell. There is 0.05% proclin 300 in the standard as preservative.

Information on reagents:
The stop solution used in the kit is sulfuric acid with concentration of 1 mol/L. And the wash solution is TBS. The standard diluent contains 0.02 % sodium azide, assay diluent A and assay diluent B contain 0.01% sodium azide. Some kits can contain is BSA in them.

Information on antibodies:
The provided antibodies and their host vary in different kits.

Probenmenge: 50 μL

Testdauer: 2 h

Plattentyp: Pre-coated

Protokoll: 1. Prepare all reagents, samples and standards;
2. Add 50µL standard or sample to each well.
    And then add 50µL prepared Detection Reagent A immediately.
    Shake and mix. Incubate 1 hour at 37°C;
3. Aspirate and wash 3 times;
4. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
5. Aspirate and wash 5 times;
6. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
7. Add 50µL Stop Solution. Read at 450 nm immediately.

Testpräzision:

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Salusin Beta (SALb) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Salusin Beta (SALb) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Beschränkungen: Nur für Forschungszwecke einsetzbar

Handhabung

Vorsichtsmaßnahmen: The Stop Solution suggested for use with this kit is an acid solution. Wear eye, hand, face, and clothing protection when using this material.

Handhabung: The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5 % within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Lagerung: 4 °C

Informationen zur Lagerung:

• For unopened kit: All the reagents should be kept according to the labels on vials. The Standard, Detection Reagent A, Detection Reagent B and the 96-well strip plate should be stored at -20°C upon receipt while the others should be at 4°C.
• For opened kit: When the kit is opened, the remaining reagents still need to be stored according to the above storage condition. Besides, please return the unused wells to the foil pouch containing the desiccant pack, and reseal along entire edge of zip-seal.
  Note: It is highly recommended to use the remaining reagents within 1 month provided this is within the expiration date of the kit.
• For ELISA kit, 1 day storage at 37°C can be considered as 2 months at 4°C, which means 3 days at 37°C equaling 6 months at 4°C.

Haltbarkeit: 6 months

Referenzen für Salusin beta ELISA Kit (ABIN414557)

Dervişoğlu, Elmas, Kösecik, İşgüven, Büyükavcı, Köroğlu: "Salusin-α levels are negatively correlated with diastolic blood pressure in children with obesity." in: Cardiology in the young, Vol. 29, Issue 10, pp. 1225-1229, (2020) (PubMed).

Wang, Wang, Zhang, Zhang, Zhang, Gong, Luo, Wang, Mao: "Salusin-β is superior to salusin-α as a marker for evaluating coronary atherosclerosis." in: The Journal of international medical research, Vol. 48, Issue 2, pp. 300060520903868, (2020) (PubMed).

Çakır, Sabah-Özcan, Saçmacı: "Increased level of plasma salusin-α and salusin-β in patients with multiple sclerosis." in: Multiple sclerosis and related disorders, Vol. 30, pp. 76-80, (2019) (PubMed).

Zhao, Zhou, Ling, Xiong, Zhang, Chen, Li, Kang, Zhu: "Salusin-β contributes to oxidative stress and inflammation in diabetic cardiomyopathy." in: Cell death & disease, Vol. 8, Issue 3, pp. e2690, (2017) (PubMed).

Wang, Dong, Cao: "Serum Salusin-β Levels Are Correlated with Slow Coronary Flow." in: Genetic testing and molecular biomarkers, Vol. 20, Issue 7, pp. 393-7, (2016) (PubMed).

Ko?akowska, Kuroczycka-Saniutycz, Wasilewska, Ola?ski: "Is the serum level of salusin-? associated with hypertension and atherosclerosis in the pediatric population?" in: Pediatric nephrology (Berlin, Germany), Vol. 30, Issue 3, pp. 523-31, (2015) (PubMed).

Liu, Ren, Zhang, Tong, Kang: "Serum salusin-β levels are associated with the presence and severity of coronary artery disease." in: Journal of investigative medicine : the official publication of the American Federation for Clinical Research, Vol. 63, Issue 4, pp. 632-5, (2015) (PubMed).

Erden, Uçak, Demir, Cicek, Bakar Dertlioğlu, Oztürk, Aydin: "Serum salusin-α and salusin-β levels in patients with psoriasis." in: European journal of dermatology : EJD, Vol. 25, Issue 4, pp. 352-3, (2015) (PubMed).

Aydin, Aydin: "Salusin-alpha and -beta expression in heart and aorta with and without metabolic syndrome." in: Biotechnic & histochemistry : official publication of the Biological Stain Commission, Vol. 89, Issue 2, pp. 98-103, (2014) (PubMed).

Celik, Celik, Yilmaz, Turkcuoglu, Karaer, Turhan, Aydin: "Association of low maternal levels of salusins with gestational diabetes mellitus and with small-for-gestational-age fetuses." in: European journal of obstetrics, gynecology, and reproductive biology, Vol. 167, Issue 1, pp. 29-33, (2013) (PubMed).

Sahin, Aydin: "Serum concentration and kidney expression of salusin-? and salusin-? in rats with metabolic syndrome induced by fructose." in: Biotechnic & histochemistry : official publication of the Biological Stain Commission, Vol. 88, Issue 3-4, pp. 153-60, (2013) (PubMed).

Aydin: "Presence of adropin, nesfatin-1, apelin-12, ghrelins and salusins peptides in the milk, cheese whey and plasma of dairy cows." in: Peptides, Vol. 43, pp. 83-7, (2013) (PubMed).

Simsek, Celik, Yilmaz, Karaer, Dogan, Aydin, Ozer: "Serum levels of apelin, salusin-alpha, and salusin-beta in normal pregnancy and preeclampsia." in: The journal of maternal-fetal & neonatal medicine, (2012) (PubMed).

Aydin, Eren, Aydin, Ozercan, Dagli: "The bioactive peptides salusins and apelin-36 are produced in human arterial and venous tissues and the changes of their levels during cardiopulmonary bypass." in: Peptides, Vol. 37, Issue 2, pp. 233-9, (2012) (PubMed).

Celik, Y?lmaz, Celik, Minareci, Turkcuoglu, Simsek, Celik, Karaer, Aydin: "Salusins, newly identified regulators of hemodynamics and mitogenesis, increase in polycystic ovarian syndrome." in: Gynecological endocrinology : the official journal of the International Society of Gynecological Endocrinology, Vol. 29, Issue 1, pp. 83-6, (2012) (PubMed).

Simsek, Celik, Yilmaz, Karaer, Dogan, Aydin, Ozer: "Serum levels of apelin, salusin-alpha and salusin-beta in normal pregnancy and preeclampsia." in: The journal of maternal-fetal & neonatal medicine, Vol. 25, Issue 9, pp. 1705-8, (2012) (PubMed).

Details zu Salusin beta

Target: Salusin beta (TOR2A)

Andere Bezeichnung: Salusin beta

UniProt: Q8N2E6