FABP5 ELISA Kit

Produktnummer ABIN2947406

Maus FABP5 ELISA Kit, Colorimetric Assay für die Quantifizierung von Maus FABP5.

Kurzübersicht für FABP5 ELISA Kit (ABIN2947406)

Target: FABP5 (Fatty Acid Binding Protein 5 (Psoriasis-Associated) (FABP5))

Reaktivität: Maus

Nachweismethode: Colorimetric

Methodentyp: Sandwich ELISA

Detektionsbereich: 78 pg/mL - 5000 pg/mL

Applikation: ELISA

Proben: Cell Lysate, Plasma, Serum, Tissue Homogenate

Produktdetails FABP5 ELISA Kit

Untere Nachweisgrenze: 78 pg/mL

Analytische Methode: Quantitative

Bestandteile: The kit components listed are for reference only. The product manual may differ slightly. The product should be used as stated on the product manual included and delivered together with the product.

• Pre-coated 96-Well Microplate
• Standard
• Standard Diluent Buffer
• Wash Buffer
• Detection Reagent A
• Detection Reagent B
• Diluent A
• Diluent B
• TMB Substrate
• Stop Solution
• Plate Sealer

Benötigtes Material:

• 37 °C incubator
• Multi and single channel pipettes and sterile pipette tips
• Squirt bottle or automated microplate washer
• 1.5 mL tubes
• Distilled water
• Absorbent filter papers
• 100 mL and 1 liter graduated cylinders
• Microplate reader (wavelength: 450 nm)
• ELISA Shaker

Anwendungsinformationen

Plattentyp: Pre-coated

Testdurchführung:

This procedure is provided for reference only. The product manual may differ slightly. The product should be used as stated on the product manual included and delivered together with the product.

• 1) Set standard, test samples and control wells.

• 2) Aliquot 100 μL of diluted standard into the standard wells.

• 3) Aliquot 100 μL of Standard Diluent buffer into control (zero) well.

• 4) Aliquot 100 μL of diluted samples into the sample wells. Incubate for 1 hr at 37 °C.

• 5) Aliquot 100 μL of Detection Reagent A to each well. Incubate for 1 hr at 37 °C.

• 6) Wash 3 times.

• 7) Aliquot 100 μL of Detection Reagent B to each well. Incubate for 30 mins at 37 °C.

• 8) Wash 5 times.

• 9) Aliquot 90 μL of TMB Substrate to each well. Incubate for 10-20 mins at 37 °C.

• 10) Aliquot 50 μL of Stop Solution.

• 11) Measure the OD at 450 nm.

Testpräzision: Intra-assay Precision (Precision within an assay): 3 samples with low, medium and high levels of Fatty Acid Binding Protein 5, Epidermal were tested 20 times on one plate, respectively.

Inter-assay Precision (Precision between assays): 3 samples with low, medium and high levels of Fatty Acid Binding Protein 5, Epidermal were tested on 3 different plates, 8 replicates in each plate.

CV (%) = (Standard Deviation / mean) x 100

Intra-Assay: CV<10%

Inter-Assay: CV<10%

Beschränkungen: Nur für Forschungszwecke einsetzbar

Handhabung

Lagerung: 4 °C

Informationen zur Lagerung: Shipped at 4 °C. Upon receipt, store the kit according to the storage instruction in the kit's manual.The stability of the kit is determined by the rate of activity loss. The loss rate is less than 5% within the expiration date under appropriate storage conditions. To minimize performance fluctuations, operation procedures and lab conditions should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same user throughout.

Haltbarkeit: 6 months

Details zu FABP5

Target: FABP5 (Fatty Acid Binding Protein 5 (Psoriasis-Associated) (FABP5))

Andere Bezeichnung: Fatty Acid Binding Protein 5, Epidermal