Telefon:
+49 (0)241 95 163 153
Fax:
+49 (0)241 95 163 155
E-Mail:
orders@antikoerper-online.de

Resistin ELISA Kit

RETN Reaktivität: Human, Maus, Ratte Colorimetric Competition ELISA 0.1-1.000 ng/mL Cell Culture Supernatant, Serum
Produktnummer ABIN1979251
  • Target Alle Resistin (RETN) ELISA Kits anzeigen
    Resistin (RETN)
    Reaktivität
    • 9
    • 4
    • 3
    • 3
    • 3
    • 2
    • 2
    • 2
    • 2
    • 2
    • 2
    • 2
    • 1
    • 1
    • 1
    Human, Maus, Ratte
    Nachweismethode
    Colorimetric
    Methodentyp
    Competition ELISA
    Detektionsbereich
    0.1-1.000 ng/mL
    Untere Nachweisgrenze
    0.1 ng/mL
    Applikation
    ELISA
    Verwendungszweck
    Human/Mouse/Rat Resistin EIA Kit optimized for serum and cell culture medium. Competition-based ELISA on a 96-well strip plate.
    Proben
    Cell Culture Supernatant, Serum
    Analytische Methode
    Quantitative
    Spezifität
    This kit detects Resistin (90aa). No other active isoforms have been reported.

    Cross Reactivity: This EIA kit shows no cross-reactivity with any of the cytokines tested: Ghrelin, Nesfatin, Angiotensin II, NPY and APC.
    Kreuzreaktivität (Details)
    This ELISA kit shows no cross-reactivity with any of the cytokines tested: Ghrelin, Nesfatin, Angiotensin II, NPY and APC.
    Sensitivität
    446 pg/mL
    Produktmerkmale
    • Strip plates and additional reagents allow for use in multiple experiments
    • Quantitative protein detection
    • Establishes normal range
    • The best products for confirmation of antibody array data
    Bestandteile
    • Pre-Coated 96-well Strip Microplate
    • Wash Buffer
    • Standard Peptide
    • Assay Diluent(s)
    • Biotinylated Peptide
    • HRP-Streptavidin
    • TMB One-Step Substrate
    • Stop Solution
    • Assay Diagram
    • Positive Control Sample
    • Capture Antibody
    • User Manual
    Benötigtes Material
    • Distilled or deionized water
    • Precision pipettes to deliver 2 μL to 1 mL volumes
    • Adjustable 1-25 mL pipettes for reagent preparation
    • 100 mL and 1 liter graduated cylinders
    • Tubes to prepare standard and sample dilutions
    • Orbital shaker
    • Aluminum foil
    • Saran Wrap
    • Absorbent paper
    • Microplate reader capable of measuring absorbance at 450nm
    • SigmaPlot software (or other software that can perform four-parameter logistic regression models)
    Featured
    Zu unserem meistverkauften RETN ELISA Kit
    Top Product
    Discover our top product RETN ELISA Kit
  • Applikationshinweise
    Recommended Dilution for serum and plasma samplesHuman: 2X / Mouse: 2X / Rat: 2X
    Probenmenge
    100 μL
    Testdauer
    5 h
    Plattentyp
    Pre-coated
    Protokoll
    1. Prepare all reagents, samples and standards as instructed.
    2. Add 100 μL detection antibody to each well.
    3. Incubate 1.5 h at RT or O/N at 4 °C.
    4. Add 100 μL standard or sample to each well.
    5. Incubate 2.5 h at RT.
    6. Add 100 μL prepared streptavidin solution.
    7. Incubate 45 min at RT.
    8. Add 100 μL TMB One-Step Substrate Reagent to each well.
    9. Incubate 30 min at RT.
    10. Add 50 μL Stop Solution to each well.
    11. Read plate at 450 nm immediately.
    Aufbereitung der Reagenzien
    1. Keep kit reagents on ice during steps. Equilibrate plate to room temperature before opening the sealed pouch.
      2. Assay Diluent B (Item E) should be diluted 5-fold with deionized or distilled water.
      3. Briefly centrifuge the Anti-Resistin Antibody vial (Item N) before use. Add 50 µL of 1x Assay Diluent B into the vial to prepare a detection antibody concentrate. Pipette up and down to mix gently.
      4. The antibody concentrate should then be diluted 100-fold with 1x Assay Diluent B. This is your anti-Resistin antibody working solution, which will be used in step 2 of the Assay Procedure. NOTE: the following steps may be done during the antibody incubation procedure (step 2 of Assay Procedure).
      5. Briefly centrifuge the vial of Biotinylated Resistin (Item F) before use. Add 5 µL of Item F to 5 mL of the appropriate Assay Diluent. Pipette up and down to mix gently. The final concentration of biotinylated Resistin will be 10 ng/mL. This solution will only be used as the diluent in step 6 of Reagent Preparation.
      6. Preparation of Standards: Label 6 microtubes with the following concentrations: 1000 ng/mL, 100 ng/mL, 10 ng/mL, 1 ng/mL, 100 pg/mL and 0 pg/mL. Pipette 450 mL of biotinylated Resistin solution into each tube, except for the 1000 ng/mL (leave this one empty). It is very important to make sure the concentration of biotinylated Resistin is 10 ng/mL in all standards. a. Briefly centrifuge the vial of Resistin (Item C). In the tube labeled 1000 ng/mL, pipette 8 µL of Item C and 792 µL of 10 ng/mL biotinylated Resistin solution (prepared in step 5 above). This is your Resistin stock solution (1000 ng/mL Resistin, 10 ng/mL biotinylated Resistin). Mix thoroughly. This solution serves as the first standard. b. To make the 100 ng/mL standard, pipette 50 µL of Resistin stock solution the tube labeled 100 ng/mL. Mix thoroughly. c. Repeat this step with each successive concentration, preparing a dilution series as shown in the illustration below. Each time, use 450 mL of biotinylated Resistin and 50 mL of the prior concentration until 100 pg/mL is reached. Mix each tube thoroughly before the next transfer. d. The final tube (0 pg/mL Resistin, 10 ng/mL biotinylated Resistin) serves as the zero standard (or total binding).
      7. Prepare a 10-fold dilution of Item F. To do this, add 2 mL of Item F to 18 mL of the appropriate Assay Diluent. This solution will be used in steps 8 and
      10.
      8. Positive Control Preparation: briefly centrifuge the positive control vial (Item M). To the tube of Item M, add 101 µL 1x Assay Diluent B. Also add 2 µL of 10-fold diluted Item F (prepared in step 7) to the tube. This is a 2-fold dilution of the positive control. Mix thoroughly. The positive control is a cell culture medium sample that is meant to be a system control (to verify that the detection & kit components are working). It may be diluted further if desired, but be sure the final concentration of biotinylated Resistin is 10 ng/mL.
      9. If Item B (20X Wash Concentrate) contains visible crystals, warm to room temperature and mix gently until dissolved. Dilute 20 mL of Wash Buffer Concentrate into deionized or distilled water to yield 400 mL of 1X Wash Buffer.
      10. Sample Preparation: Use Assay Diluent A + biotinylated Resistin to dilute serum/plasma samples. For cell culture medium and other sample types, use 1X Assay Diluent B + biotinylated Resistin as the diluent. It is very important to make sure the final concentration of the biotinylated Resistin is 10 ng/mL in every sample.
      Example: to make a 4-fold dilution of sample, mix together 2.5 µL of 10-fold diluted Item F (prepared in step 7), 185 mL of appropriate Assay Diluent, and 62.5 µL of your sample, mix gently. The total volume is 250 µl, enough for duplicate wells on the microplate. Do not use Item F diluent from Step 5 for sample preparation. If you plan to use undiluted samples, you must still add biotinylated Resistin to a final concentration of 10 ng/mL.
      Example: Add 2.5 mL of 10-fold diluted Item F to 247.5 mL of sample.
      11. Briefly centrifuge the HRP-Streptavidin vial (Item G) before use. The HRP-Streptavidin concentrate should be diluted 160- fold with 1X Assay Diluent B. Note: Do not use Assay Diluent A for HRP-Streptavidin preparation in Step 11.
    Aufbereitung der Proben

    Use Assay Diluent A + biotinylated Resistin to dilute serum/plasma samples. For cell culture medium and other sample types, use 1X Assay Diluent B + biotinylated Resistin as the diluent. It is very important to make sure the final concentration of the biotinylated Resistin is 10 ng/mL in every sample. EXAMPLE: to make a 4-fold dilution of sample, mix together 2.5 µL of 10-fold diluted Item F (prepared in step 7), 185 mL of appropriate Assay Diluent, and 62.5 µL of your sample, mix gently. The total volume is 250 µl, enough for duplicate wells on the microplate. Do not use Item F diluent from Step 5 for sample preparation. If you plan to use undiluted samples, you must still add biotinylated Resistin to a final concentration of 10 ng/mL. EXAMPLE: Add 2.5 mL of 10-fold diluted Item F to 247.5 mL of sample.

    Testdurchführung
    1. Keep kit reagents on ice during reagent preparation steps. It is recommended that all standards and samples be run at least in duplicate.
      2. Add 100 µL anti-Resistin antibody (see Reagent Preparation step 4) to each well. Incubate for 1.5 hours at room temperature with gentle shaking (1-2 cycles/sec). You may also incubate overnight at 4 degrees C.
      3. Discard the solution and wash wells 4 times with 1x Wash Buffer (200-300 µL each), Washing may be done with a multichannel pipette or an automated plate washer. Complete removal of liquid at each step is essential to good assay performance. After the last wash, remove any remaining Wash Buffer by aspirating or decanting. Invert the plate and blot it against clean paper towels.
      4. Add 100 µL of each standard (see Reagent Preparation step 6), positive control (see Reagent Preparation step 8) and sample (see Reagent Preparation step 10) into appropriate wells. Be sure to include a blank well (Assay Diluent only). Cover wells and incubate for 2.5 hours at room temperature with gentle shaking (1-2 cycles/sec) or overnight at 4 °C.
      5. Discard the solution and wash 4 times as directed in Step
      3.
      6. Add 100 µL of prepared HRP-Streptavidin solution (see Reagent Preparation step 11) to each well. Incubate for 45 minutes with gentle shaking at room temperature. It is recommended that incubation time should not be shorter or longer than 45 minutes.
      7. Discard the solution and wash 4 times as directed in Step
      3.
      8. Add 100 µL of TMB One-Step Substrate Reagent (Item H) to each well. Incubate for 30 minutes at room temperature in the dark with gentle shaking (1-2 cycles/sec).
      9. Add 50 µL of Stop Solution (Item I) to each well. Read absorbances at 450 nm immediately. 1
    Ergebnisberechnung

    Calculate the mean absorbance for each set of duplicate standards, controls and samples, and subtract the blank optical density. Plot the standard curve using SigmaPlot software (or other software which can perform four-parameter logistic regression models), with standard concentration on the x-axis and percentage of absorbance on the y-axis. Draw the best-fit curve through the standard points.

    Testpräzision
    Intra-Assay: CV < 10 %
    Inter-Assay: CV < 15 %
    Beschränkungen
    Nur für Forschungszwecke einsetzbar
  • Handhabung
    Avoid repeated freeze/thaw cycles.
    Lagerung
    -20 °C
    Informationen zur Lagerung
    Standard, Biotinylated Resistin peptide, and Positive Control should be stored at -20°C after arrival. Avoid multiple freeze-thaws. The remaining kit components may be stored at 4°C. Opened Microplate Wells and antibody (Item N) may be stored for up to 1 month at 2° to 8°C. Return unused wells to the pouch containing desiccant pack and reseal along entire edge.
    Haltbarkeit
    6 months
  • Nie, Hui, Gao, Li, Lin, Xiang, Ding, Kuang, Xu, Fei, Wang, Wu: "Adipose tissue deletion of Gpr116 impairs insulin sensitivity through modulation of adipose function." in: FEBS letters, Vol. 586, Issue 20, pp. 3618-25, (2012) (PubMed).

    Patel, Rajala, Rossetti, Scherer, Shapiro: "Disulfide-dependent multimeric assembly of resistin family hormones." in: Science (New York, N.Y.), Vol. 304, Issue 5674, pp. 1154-8, (2004) (PubMed).

    Steppan, Bailey, Bhat, Brown, Banerjee, Wright, Patel, Ahima, Lazar: "The hormone resistin links obesity to diabetes." in: Nature, Vol. 409, Issue 6818, pp. 307-12, (2001) (PubMed).

  • Target Alle Resistin (RETN) ELISA Kits anzeigen
    Resistin (RETN)
    Andere Bezeichnung
    Resistin (RETN Produkte)
    Synonyme
    RETN ELISA Kit, ADSF ELISA Kit, FIZZ3 ELISA Kit, RETN1 ELISA Kit, RSTN ELISA Kit, XCP1 ELISA Kit, Fizz3 ELISA Kit, Rstn ELISA Kit, Xcp4 ELISA Kit, resistin ELISA Kit, RETN ELISA Kit, Retn ELISA Kit
    Hintergrund
    Resistin, adipose tissue-specific secretory factor (ADSF), C/EBP-epsilon-regulated myeloid-specific secreted cysteine-rich protein (XCP1)
    Gen-ID
    57264
    UniProt
    Q99P87
    Pathways
    Feeding Behaviour, Smooth Muscle Cell Migration
Sie sind hier:
Kundenservice