ADIPOQ ELISA Kit

Produktnummer ABIN1112554

Maus ADIPOQ ELISA-Kit Colorimetric-Assay zur Quantifizierung von Maus ADIPOQ.

Kurzübersicht für ADIPOQ ELISA Kit (ABIN1112554)

Target: ADIPOQ (Adiponectin (ADIPOQ))

Reaktivität: Maus

Nachweismethode: Colorimetric

Methodentyp: Sandwich ELISA

Detektionsbereich: 312-20000 pg/mL

Applikation: ELISA

Proben: Cell Culture Supernatant, Plasma, Serum, Tissue Lysate

Produktdetails ADIPOQ ELISA Kit

Untere Nachweisgrenze: 312 pg/mL

Verwendungszweck: For quantitative detection of Adiponectin in mouse serum, plasma, body fluids, tissue lysates or cell culture supernatants.

Analytische Methode: Quantitative

Sensitivität: < 10 pg/mL

Bestandteile: 1. One 96-well plate pre-coated with anti-mouse Adiponectin antibody 2. Lyophilized mouse Adiponectin standards: 2 tubes (20ng / tube) 3. Sample / Standard diluent buffer: 30ml 4. Biotin conjugated anti-mouse Adiponectin antibody (Concentrated): 130 µl.

Benötigtes Material: 1. 37 °C incubator 2. Microplate reader (wavelength: 450nm) 3. Precise pipette and disposable pipette tips 4. Automated plate washer 5. ELISA shaker 6. 1.5ml of Eppendorf tubes 7. Plate cover 8. Absorbent filter papers 9. Plastic or glass container with volume of above 1L

Anwendungsinformationen

Kommentare:

This kit was based on sandwich enzyme-linked immune-sorbent assay technology. Anti-Adiponectin polyclonal antibody was pre-coated onto 96-well plates. And the biotin conjugated anti-Adiponectin polyclonal antibody was used as detection antibodies. The standards test samples and biotin conjugated detection antibody were added - the wells subsequently and wash with wash buffer. Avidin-Biotin-Peroxidase Complex was added and unbound conjugates were washed away with wash buffer. TMB substrates were used - visualize HRP enzymatic reaction. TMB was catalyzed by HRP - produce a blue color product that changed into yellow after adding acidic stop solution. The density of yellow is proportional - the Adiponectin amount of sample captured in plate. Read the O.D. absorbance at 450 nm in a microplate reader and then the concentration of Adiponectin can be calculated.

Plattentyp: Pre-coated

Aufbereitung der Reagenzien:

1. Before the experiment, centrifuge each kit component for several minutes to bring down all reagents to the bottom of tubes. 2. It is recommend to measure each standard and sample in duplicate. 3. Do NOT let the plate completely dry at any time! Since the dry condition can inactivate the biological material on the plate. 4. Do not reuse pipette tips and tubes to avoid cross contamination. 5. Do not use the expired components and the components from different batches. 6. To avoid the marginal effect of plate incubation for temperature differences (the marginal wells always get stronger reaction), it is recommend to equilibrate the ABC working solution and TMB substrate for at least 30 min at room temperature (37°C ) before adding to wells.The TMB substrate (Kit Component 8) is colorless and transparent before use, if not, please contact us for replacement.

Aufbereitung der Proben:

Preparation of sample and reagents 1. Sample Isolate the test samples soon after collecting, then, analyze immediately (within 2 hours). Or aliquot and store at -20 °C for long term. Avoid multiple freeze-thaw cycles.
Body fluids, tissue lysates and cell culture supernatants: Centrifuge to remove precipitate, analyze immediately or aliquot and store at -20 °C .
Serum: Coagulate the serum at room temperature (about 4 hours). Centrifuge at approximately 2000 × g for 20 min. Analyze the serum immediately or aliquot and store at -20 °C .
Plasma: Collect plasma with heparin, citrate or EDTA as the anticoagulant. Centrifuge for 20 min at 2000 x g within 30 min of collection. Analyze immediately or aliquot and store frozen at -20 °C. Note: 1. Coagulate blood samples completely, then, centrifuge, and avoid hemolysis and particle. 2. NaN3 can not be used as test sample preservative, since it is the inhibitor for HRP.

Beschränkungen: Nur für Forschungszwecke einsetzbar

Handhabung

Konservierungsmittel: Sodium azide, Thimerosal (Merthiolate)

Details zu ADIPOQ

Target: ADIPOQ (Adiponectin (ADIPOQ))

Andere Bezeichnung: Adiponectin / Acrp 30

Hintergrund: Adiponectin (also referred to as GBP-28, apM1, AdipoQ and Acrp30) is a protein which in humans is encoded by the ADIPOQ gene. This gene spans 16 kb, contains 3 exons, and maps to to chromosome 3q27. Adiponectin is a 244-amino-acid-long polypeptide, and it has four distinct regions. It is a hormone secreted by adipocytes (and also from the placenta in pregnancy) that regulates energy homeostasis and glucose and lipid metabolism. Adipocytes also produce and secrete proteins such as leptin, adipsin, various other complement components and tumor necrosis factor, suggesting a possible link to the immune system.