Telefon:
+49 (0)241 95 163 153
Fax:
+49 (0)241 95 163 155
E-Mail:
orders@antikoerper-online.de

SERPINA1 ELISA Kit

SERPINA1 Reaktivität: Ratte Colorimetric Competition ELISA 62.5 ng/mL - 4000 ng/mL Plasma, Serum, Tissue Homogenate
Produktnummer ABIN6975892
  • Target Alle SERPINA1 ELISA Kits anzeigen
    SERPINA1 (serpin Peptidase Inhibitor, Clade A (Alpha-1 Antiproteinase, Antitrypsin), Member 1 (SERPINA1))
    Reaktivität
    • 5
    • 4
    • 3
    • 2
    • 2
    • 2
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    • 1
    Ratte
    Nachweismethode
    Colorimetric
    Methodentyp
    Competition ELISA
    Detektionsbereich
    62.5 ng/mL - 4000 ng/mL
    Untere Nachweisgrenze
    62.5 ng/mL
    Applikation
    ELISA
    Verwendungszweck
    For the quantitative determination of rat alpha-1-antitrypsin(SERPINA1) concentrations in serum, plasma, tissue homogenates.
    Proben
    Plasma, Serum, Tissue Homogenate
    Analytische Methode
    Quantitative
    Spezifität
    This assay has high sensitivity and excellent specificity for detection of rat SERPINA1. No significant cross-reactivity or interference between rat SERPINA1 and analogues was observed. Note: Limited by current skills and knowledge, it is impossible for us to complete the cross-reactivity detection between rat SERPINA1 and all the analogues, therefore, cross reaction may still exist.
    Sensitivität
    15.6 ng/mL
    Bestandteile
    • Assay plate
    • Standard
    • HRP-conjugate (100 x concentrate)
    • Sample Diluent
    • HRP-conjugate Diluent
    • Wash Buffer (25 x concentrate)
    • TMB Substrate
    • Stop Solution
    • Adhesive Strip
  • Stop Solution
  • Adhesive Strip
  • Top Product
    Discover our top product SERPINA1 ELISA Kit
  • Applikationshinweise
    Optimal working dilution should be determined by the investigator.
    Probenmenge
    50 μL
    Testdauer
    1 - 4.5 h
    Plattentyp
    Pre-coated
    Protokoll
    1. Prepare reagents, samples and standards as instructed.
    2. Set a Blank well without any solution.
    3. Add 50 µL standard or sample to each well.
    4. Add 50 µL HRP-conjugate (1x) to each well (Not to Blank well).
    5. Incubate 1 hour at 37 °C
    6. Aspirate and wash 5 times.
    7. Add 90 μL of TMB Substrate to each well. Incubate for 20 minutes at 37 °C. Protect from light.
    8. Add 50 µL Stop Solution to each well. Read at 450 nm within 5 minutes.
    Aufbereitung der Reagenzien
    1. HRP-conjugate (1x) - Centrifuge the vial before opening. HRP-conjugate requires a 100-fold dilution. A suggested 100-fold dilution is 10 μL of HRP-conjugate + 990 μL of HRP-conjugate Diluent.
    2. Wash Buffer(1x)- If crystals have formed in the concentrate, warm up to room temperature and mix gently until the crystals have completely dissolved. Dilute 20 mL of Wash Buffer Concentrate (25 x) into deionized or distilled water to prepare 500 mL of Wash Buffer (1 x).
    3. Standard Centrifuge the standard vial at 6000-10000rpm for 30s. Reconstitute the Standard with 1.0 mL of Sample Diluent. Do not substitute other diluents. This reconstitution produces a stock solution of 4000 ng/mL. Mix the standard to ensure complete reconstitution and allow the standard to sit for a minimum of 15 minutes with gentle agitation prior to making dilutions. Pipette 150 μL of Sample Diluent into each tube (S0-S6). Use the stock solution to produce a 2-fold dilution series (below). Mix each tube thoroughly before the next transfer. The undiluted Standard serves as the high standard (4000 ng/mL). Sample Diluent serves as the zero standard (0 ng/mL).
    Note:
    • Kindly use graduated containers to prepare the reagent. Please don't prepare the reagent directly in the Diluent vials provided in the kit.
    • Bring all reagents to room temperature (18-25 °C) before use for 30 min.
    • Prepare fresh standard for each assay. Use within 4 hours and discard after use.
    • Making serial dilution in the wells directly is not permitted.
    • Please carefully reconstitute Standards according to the instruction, and avoid foaming and mix gently until the crystals have completely dissolved. To minimize imprecision caused by pipetting, use small volumes and ensure that pipettors are calibrated. It is recommended to suck more than 10 μL for once pipetting.
    • Distilled water is recommended to be used to make the preparation for reagents. Contaminated water or container for reagent preparation will influence the detection result.
    Aufbereitung der Proben
    • It is recommended to use fresh samples without long storage, otherwise protein degradation and denaturationmay occur in these samples, leading to false results. Samples should therefore be stored for a short periodat 2 - 8 °C or aliquoted at -20 °C (≤1 month) or -80 °C (≤ 3 months). Repeated freeze-thawcycles should be avoided. Prior to assay, the frozen samples should be slowly thawed and centrifuged toremove precipitates.
    • If the sample type is not specified in the instructions, a preliminary test is necessary to determinecompatibility with the kit.
    • If a lysis buffer is used to prepare tissue homogenates or cell culture supernatant, there is a possibilityof causing a deviation due to the introduced chemical substance.The recommended dilution factor is for reference only.
    • Please estimate the concentration of the samples before performing the test. If the values are not in therange of the standard curve, the optimal sample dilution for the particular experiment has to be determined.Samples should then be diluted with PBS (pH =7.0-7.2).
    Note:
    Recommend to dilute the serum or plasma samples with Sample Diluent(1:2500) before test. The suggested 2500-fold dilution can be achieved by adding 2 μL sample to 98 μL of Sample Diluent. Complete the 2500-fold dilution by adding 5 μL of this solution to 245 μL of Sample Diluent. The recommended dilution factor is for reference only. The optimal dilution factor should be determined by users according to their particular experiments. 6
    Testpräzision
    Intra-assay Precision (Precision within an assay): CV%<8% Three samples of known concentration were tested twenty times on one plate to assess.
    Inter-assay Precision (Precision between assays): CV%<10% Three samples of known concentration were tested in twenty assays to assess.
    Beschränkungen
    Nur für Forschungszwecke einsetzbar
  • Lagerung
    4 °C,-20 °C
    Informationen zur Lagerung
    Unopened kit Store at 2 - 8°C. Do not use the kit beyond the expiration date. May be stored for up to 1 month at 2 - 8°C. Coated assay Try to keep it in a sealed aluminum foil bag, plate and avoid the damp. Standard May be stored for up to 1 month at 2 - 8° C. If don't make recent use, better keep it store at HRP-conjugate -20°C. Opened kit HRP-conjugate Diluent Sample Diluent May be stored for up to 1 month at 2 - 8°C. Wash Buffer TMB Substrate Stop Solution *Provided this is within the expiration date of the kit.
    Haltbarkeit
    6 months
  • Target Alle SERPINA1 ELISA Kits anzeigen
    SERPINA1 (serpin Peptidase Inhibitor, Clade A (Alpha-1 Antiproteinase, Antitrypsin), Member 1 (SERPINA1))
    Andere Bezeichnung
    serpin peptidase inhibitor, clade A (alpha-1 antiproteinase, antitrypsin), member 1 (SERPINA1 Produkte)
    Synonyme
    AACT ELISA Kit, ACT ELISA Kit, GIG25 ELISA Kit, A1AT ELISA Kit, PI ELISA Kit, alpha-1-PI ELISA Kit, A1A ELISA Kit, AAT ELISA Kit, PI1 ELISA Kit, PRO2275 ELISA Kit, alpha1AT ELISA Kit, Pi ELISA Kit, Spi1 ELISA Kit, MGC64429 ELISA Kit, serpina1d ELISA Kit, Aps ELISA Kit, SERPINA3-5 ELISA Kit, serpin family A member 3 ELISA Kit, alpha-1-antiproteinase F precursor ELISA Kit, serpin family A member 1 ELISA Kit, alpha-1-antitrypsin ELISA Kit, calumenin ELISA Kit, serpin peptidase inhibitor, clade A (alpha-1 antiproteinase, antitrypsin), member 1 S homeolog ELISA Kit, serpin peptidase inhibitor, clade A (alpha-1 antiproteinase, antitrypsin), member 1 ELISA Kit, serpin peptidase inhibitor, clade A (alpha-1 antiproteinase, antitrypsin), member 5 ELISA Kit, SH2B adaptor protein 2 ELISA Kit, serpin peptidase inhibitor, clade A (alpha-1 antiproteinase, antitrypsin), member 3 ELISA Kit, serpin peptidase inhibitor, clade A (alpha-1 antiproteinase, antitrypsin), member 1 L homeolog ELISA Kit, SERPINA3 ELISA Kit, LOC100008973 ELISA Kit, SERPINA1 ELISA Kit, LOC100328621 ELISA Kit, CALU ELISA Kit, Serpina1 ELISA Kit, serpina1.S ELISA Kit, serpina1 ELISA Kit, SPIA5 ELISA Kit, Sh2b2 ELISA Kit, Calu ELISA Kit, serpina1.L ELISA Kit
    Hintergrund

    Abbreviation: SERPINA1

    Alias: A1A, A1AT, AAT, MGC23330, MGC9222, PI, PI1, PRO2275, OTTHUMP00000197150|protease inhibitor 1 (anti-elastase), alpha-1-antitrypsin|serine (or cysteine) proteinase inhibitor, clade A, member 1|serine

    UniProt
    P17475
Sie sind hier:
Kundenservice