Telefon:
+49 (0)241 95 163 153
Fax:
+49 (0)241 95 163 155
E-Mail:
orders@antikoerper-online.de

AGT ELISA Kit

AGT Reaktivität: Human, Maus, Ratte Colorimetric Competition ELISA 0.1-1.000 pg/mL Serum
Produktnummer ABIN1979313
  • Target Alle AGT ELISA Kits anzeigen
    AGT (Angiotensinogen (serpin Peptidase Inhibitor, Clade A, Member 8) (AGT))
    Reaktivität
    • 8
    • 7
    • 7
    • 5
    • 3
    • 3
    • 2
    • 2
    • 2
    • 2
    • 1
    • 1
    • 1
    Human, Maus, Ratte
    Nachweismethode
    Colorimetric
    Methodentyp
    Competition ELISA
    Detektionsbereich
    0.1-1.000 pg/mL
    Untere Nachweisgrenze
    0.1 pg/mL
    Applikation
    ELISA
    Verwendungszweck
    Human/Mouse/Rat Angiotensin II EIA Kit optimized for serum. Competition-based ELISA on a 96-well strip plate.
    Proben
    Serum
    Analytische Methode
    Quantitative
    Spezifität
    This kit can theoretically detect all active angiotensins, including ANGI, ANGII, ANGIII and ANGIV. However, it does not detect inactive angiotensinogen.

    Cross Reactivity: This EIA kit shows no cross-reactivity with any of the cytokines tested: Ghrelin, Nesfatin, NPY and APC.
    Kreuzreaktivität (Details)
    This ELISA kit shows no cross-reactivity with any of the cytokines tested: Ghrelin, Nesfatin, NPY and APC. However, it does not detect inactive angiotensinogen.
    Sensitivität
    2.62 pg/mL
    Produktmerkmale
    • Strip plates and additional reagents allow for use in multiple experiments
    • Quantitative protein detection
    • Establishes normal range
    • The best products for confirmation of antibody array data
    Bestandteile
    • Pre-Coated 96-well Strip Microplate
    • Wash Buffer
    • Standard Peptide
    • Assay Diluent(s)
    • Biotinylated Peptide
    • HRP-Streptavidin
    • TMB One-Step Substrate
    • Stop Solution
    • Assay Diagram
    • Positive Control Sample
    • Capture Antibody
    • User Manual
    Benötigtes Material
    • Distilled or deionized water
    • Precision pipettes to deliver 2 μL to 1 mL volumes
    • Adjustable 1-25 mL pipettes for reagent preparation
    • 100 mL and 1 liter graduated cylinders
    • Tubes to prepare standard and sample dilutions
    • Orbital shaker
    • Aluminum foil
    • Saran Wrap
    • Absorbent paper
    • Microplate reader capable of measuring absorbance at 450nm
    • SigmaPlot software (or other software that can perform four-parameter logistic regression models)
    Featured
    Zu unserem meistverkauften AGT ELISA Kit
    Top Product
    Discover our top product AGT ELISA Kit
  • Applikationshinweise
    Recommended Dilution for serum and plasma samplesHuman: 2X / Mouse: 2X / Rat: 2X
    Probenmenge
    100 μL
    Testdauer
    5 h
    Plattentyp
    Pre-coated
    Protokoll
    1. Prepare all reagents, samples and standards as instructed.
    2. Add 100 μL detection antibody to each well.
    3. Incubate 1.5 h at RT or O/N at 4 °C.
    4. Add 100 μL standard or sample to each well.
    5. Incubate 2.5 h at RT.
    6. Add 100 μL prepared streptavidin solution.
    7. Incubate 45 min at RT.
    8. Add 100 μL TMB One-Step Substrate Reagent to each well.
    9. Incubate 30 min at RT.
    10. Add 50 μL Stop Solution to each well.
    11. Read plate at 450 nm immediately.
    Aufbereitung der Reagenzien
    1. Keep kit reagents on ice during steps. Equilibrate plate to room temperature before opening the sealed pouch.
      2. Briefly centrifuge the Anti-Angiotensin II Antibody vial (Item N) before use. Add 50 µL of 1x Assay Diluent E into the vial to prepare a detection antibody concentrate. Pipette up and down to mix gently.
      3. The antibody concentrate should then be diluted 100-fold with 1x Assay Diluent E. This is your anti-Angiotensin II antibody working solution, which will be used in step 2 of the Assay Procedure. NOTE: the following steps may be done during the antibody incubation procedure (step 2 of Assay Procedure).
      4. Briefly centrifuge the vial of biotinylated Angiotensin II peptide (Item F) before use. Add 10 µL of Item F to 5 mL of the 1X Assay Diluent E. Pipette up and down to mix gently. The final concentration of biotinylated Angiotensin II will be 200 pg/mL. This solution will only be used as the diluent in step 5 of Reagent Preparation.
      5. Preparation of Standards: Label 6 microtubes with the following concentrations: 10000 pg/mL, 1000 pg/mL, 100 pg/mL, 10 pg/mL, 1 pg/mL and 0 pg/mL. Pipette 450 mL of biotinylated Angiotensin II solution into each tube, except for the 10000 pg/mL (leave this one empty). It is very important to make sure the concentration of biotinylated Angiotensin II is 200 pg/mL in all standards. a. Briefly centrifuge the vial of standard Angiotensin II peptide (Item C). In the tube labeled 10000 pg/mL, pipette 8 µL of Item C and 792 µL of 200 pg/mL biotinylated Angiotensin II solution (prepared in step 4 above). This is your Angiotensin II stock solution (10000 pg/mL Angiotensin II, 200 pg/mL biotinylated Angiotensin II). Mix thoroughly. This solution serves as the first standard. b. To make the 1000 pg/mL standard, pipette 50 µL of Angiotensin II stock solution the tube labeled 1000 pg/mL. Mix thoroughly. c. Repeat this step with each successive concentration, preparing a dilution series as shown in the illustration below. Each time, use 450 mL of biotinylated Angiotensin II and 50 mL of the prior concentration until 1 pg/mL is reached. Mix each tube thoroughly before the next transfer. d. The final tube (0 pg/mL Angiotensin II, 200 pg/mL biotinylated Angiotensin II) serves as the zero standard (or total binding).
      6. Prepare a 10-fold dilution of Item F. To do this, add 2 mL of Item F to 18 mL of the 1XAssay Diluent E. This solution will be used in steps 7 and
      9.
      7. Positive Control Preparation: Briefly centrifuge the positive control vial (Item M). To the tube of Item M, add 101 µL 1x Assay Diluent E. Also add 4 µL of 10-fold diluted Item F (prepared in step 6) to the tube. This is a 2-fold dilution of the positive control. Mix thoroughly. The positive control is a cell culture medium sample that is meant to be a system control (to verify that the detection & kit components are working). It may be diluted further if desired, but be sure the final concentration of biotinylated Angiotensin II is 200 pg/mL.
      8. If Item B (20X Wash Concentrate) contains visible crystals, warm to room temperature and mix gently until dissolved. Dilute 20 mL of Wash Buffer Concentrate into deionized or distilled water to yield 400 mL of 1X Wash Buffer. 10000 1000 100 10 1 0 pg/mL pg/mL pg/mL pg/mL pg/mL pg/mL 50 mL 50 mL 50 mL 50 mL
      9. Sample Preparation: Use 1X Assay Diluent E + biotinylated ANGII to dilute samples, including serum/plasma, cell culture medium and other sample types. It is very important to make sure the final concentration of the biotinylated Angiotensin II is 200 pg/mL in every sample.
      Example: to make a 4-fold dilution of sample, mix together 5 µL of 10-fold diluted Item F (prepared in step 6), 182.5 mL of 1X Assay Diluent E, and 62.5 µL of your sample, mix gently. The total volume is 250 µl, enough for duplicate wells on the microplate. Do not use Item F diluent from Step 5 for sample preparation. If you plan to use undiluted samples, you must still add biotinylated Angiotensin II to a final concentration of 200 pg/mL.
      Example: Add 5 mL of 10-fold diluted Item F to 245 mL of sample.
      10. Briefly centrifuge the HRP-Streptavidin vial (Item G) before use. The HRP-Streptavidin concentrate should be diluted 200- fold with 1X Assay Diluent E.
    Aufbereitung der Proben

    Use 1X Assay Diluent E + biotinylated ANGII to dilute samples, including serum/plasma, cell culture medium and other sample types. It is very important to make sure the final concentration of the biotinylated Angiotensin II is 200 pg/mL in every sample. EXAMPLE: to make a 4-fold dilution of sample, mix together 5 µL of 10-fold diluted Item F (prepared in step 6), 182.5 mL of 1X Assay Diluent E, and 62.5 µL of your sample, mix gently. The total volume is 250 µl, enough for duplicate wells on the microplate. Do not use Item F diluent from Step 5 for sample preparation. If you plan to use undiluted samples, you must still add biotinylated Angiotensin II to a final concentration of 200 pg/mL. EXAMPLE: Add 5 mL of 10-fold diluted Item F to 245 mL of sample.

    Testdurchführung
    1. Keep kit reagents on ice during reagent preparation steps. It is recommended that all standards and samples be run at least in duplicate.
      2. Add 100 µL anti-Angiotensin II antibody (see Reagent Preparation step 3) to each well. Incubate for 1.5 hours at room temperature with gentle shaking (1-2 cycles/sec). You may also incubate overnight at 4 degrees C. 0
      3. Discard the solution and wash wells 4 times with 1x Wash Buffer (200-300 µL each). Washing may be done with a multichannel pipette or an automated plate washer. Complete removal of liquid at each step is essential to good assay performance. After the last wash, remove any remaining Wash Buffer by aspirating or decanting. Invert the plate and blot it against clean paper towels.
      4. Add 100 µL of each standard (see Reagent Preparation step 5), positive control (see Reagent Preparation step 7) and sample (see Reagent Preparation step 9) into appropriate wells. Be sure to include a blank well (Assay Diluent only). Cover wells and incubate for 2.5 hours at room temperature with gentle shaking (1-2 cycles/sec) or overnight at 4 °C.
      5. Discard the solution and wash 4 times as directed in Step
      3.
      6. Add 100 µL of prepared HRP-Streptavidin solution (see Reagent Preparation step 10) to each well. Incubate for 45 minutes with gentle shaking at room temperature. It is recommended that the incubation time should not be shorter or longer than 45 minutes.
      7. Discard the solution and wash 4 times as directed in Step
      3.
      8. Add 100 µL of TMB One-Step Substrate Reagent (Item H) to each well. Incubate for 30 minutes at room temperature in the dark with gentle shaking (1-2 cycles/sec).
      9. Add 50 µL of Stop Solution (Item I) to each well. Read absorbances at 450 nm immediately.
    Ergebnisberechnung

    Calculate the mean absorbance for each set of duplicate standards, controls and samples, and subtract the blank optical density. Plot the standard curve using SigmaPlot software (or other software which can perform four-parameter logistic regression models), with standard concentration on the x-axis and percentage of absorbance on the y-axis. Draw the best-fit curve through the standard points.

    Testpräzision
    Intra-Assay: CV < 10 %
    Inter-Assay: CV < 15 %
    Beschränkungen
    Nur für Forschungszwecke einsetzbar
  • Handhabung
    Avoid repeated freeze/thaw cycles.
    Lagerung
    -20 °C
    Informationen zur Lagerung
    Standard, Biotinylated Angiotensin II peptide, and Positive Control should be stored at -20°C after arrival. Avoid multiple freeze-thaws. The remaining kit components may be stored at 4°C. Opened Microplate Wells and antibody (Item N) may be stored for up to 1 month at 2° to 8°C. Return unused wells to the pouch containing desiccant pack and reseal along entire edge.
    Haltbarkeit
    6 months
  • Joshi, Gupta, Khan, Kumar, Sharma, Kumar, Sharma: "Interrelationship between angiogenesis, inflammation and oxidative stress in Indian patients with multiple myeloma." in: Clinical & translational oncology : official publication of the Federation of Spanish Oncology Societies and of the National Cancer Institute of Mexico, Vol. 18, Issue 2, pp. 132-7, (2016) (PubMed).

    Pandey, Jain, Rana, Puri, Arudra, Mopidevi, Kaw, Nasjletti, Kumar: "Dexamethasone promotes hypertension by allele-specific regulation of the human angiotensinogen gene." in: The Journal of biological chemistry, Vol. 290, Issue 9, pp. 5749-58, (2015) (PubMed).

    Emdin, Fatini, Mirizzi, Poletti, Borrelli, Prontera, Latini, Passino, Clerico, Vergaro: "Biomarkers of activation of renin-angiotensin-aldosterone system in heart failure: how useful, how feasible?" in: Clinica chimica acta; international journal of clinical chemistry, Vol. 443, pp. 85-93, (2015) (PubMed).

    Najafipour, Vakili, Shahouzehi, Soltani Hekmat, Masoomi, Yeganeh Hajahmadi, Esmaeli-Mahani: "Investigation of changes in apelin receptor mRNA and protein expression in the myocardium and aorta of rats with two-kidney, one-clip (2K1C) Goldblatt hypertension." in: Journal of physiology and biochemistry, Vol. 71, Issue 2, pp. 165-75, (2015) (PubMed).

    Sugimura-Wakayama, Katagiri, Osugi, Kawai, Ogata, Sakaguchi, Hibi: "Peripheral Nerve Regeneration by Secretomes of Stem Cells from Human Exfoliated Deciduous Teeth." in: Stem cells and development, Vol. 24, Issue 22, pp. 2687-99, (2015) (PubMed).

    Xue, Chen, Li, Zhang, Patterson, Luo: "Maternal High-Fat Diet Causes a Sex-Dependent Increase in AGTR2 Expression and Cardiac Dysfunction in Adult Male Rat Offspring." in: Biology of reproduction, Vol. 93, Issue 2, pp. 49, (2015) (PubMed).

    Zheng, Cheng, Dong, Li, Xiong, Qian, Chen: "Advanced glycation end products upregulate angiopoietin-like protein 4 expression by activating the renin-angiotensin system in endothelial cells." in: Biomedical reports, Vol. 3, Issue 4, pp. 578-582, (2015) (PubMed).

    Hou, Yan, Guo, Xing, Zheng, Zhou, Huang, Long, Zhong, Wu, Wang, Wang: "Cardiac stem cells transplantation enhances the expression of connexin 43 via the ANG II/AT1R/TGF-beta1 signaling pathway in a rat model of myocardial infarction." in: Experimental and molecular pathology, Vol. 99, Issue 3, pp. 693-701, (2015) (PubMed).

    Youn, Zhou, Cai: "Bone Morphogenic Protein 4 Mediates NOX1-Dependent eNOS Uncoupling, Endothelial Dysfunction, and COX2 Induction in Type 2 Diabetes Mellitus." in: Molecular endocrinology (Baltimore, Md.), Vol. 29, Issue 8, pp. 1123-33, (2015) (PubMed).

    Hao, Wang, Cheng, You, Ma, Zhong, Quan, Luo: "The up-regulation of endothelin-1 and down-regulation of miRNA-125a-5p, -155, and -199a/b-3p in human atherosclerotic coronary artery." in: Cardiovascular pathology : the official journal of the Society for Cardiovascular Pathology, Vol. 23, Issue 4, pp. 217-23, (2015) (PubMed).

    Dhar, Sharma, Hota, Das, Hota, Srivastava, Singh: "Autonomic cardiovascular responses in acclimatized lowlanders on prolonged stay at high altitude: a longitudinal follow up study." in: PLoS ONE, Vol. 9, Issue 1, pp. e84274, (2014) (PubMed).

    Azibani, Devaux, Coutance, Schlossarek, Polidano, Fazal, Merval, Carrier, Solal, Chatziantoniou, Launay, Samuel, Delcayre: "Aldosterone inhibits the fetal program and increases hypertrophy in the heart of hypertensive mice." in: PLoS ONE, Vol. 7, Issue 5, pp. e38197, (2012) (PubMed).

    Mascareno, Galatioto, Rozenberg, Salciccioli, Kamran, Lazar, Liu, Pedrazzini, Siddiqui et al.: "Cardiac lineage protein-1 (CLP-1) regulates cardiac remodeling via transcriptional modulation of diverse hypertrophic and fibrotic responses and angiotensin II-transforming growth factor ? (TGF-?1) ..." in: The Journal of biological chemistry, Vol. 287, Issue 16, pp. 13084-93, (2012) (PubMed).

    Cheng, Tang, Zheng, Liu, Ye, Wang, Lou: "Advanced glycation end-products activate the renin-angiotensin system through the RAGE/PI3-K signaling pathway in podocytes." in: Clinical and investigative medicine. Me?decine clinique et experimentale, Vol. 35, Issue 5, pp. E282, (2012) (PubMed).

    Fouad, Al-Mulhim, Jresat: "Telmisartan treatment attenuates arsenic-induced hepatotoxicity in mice." in: Toxicology, Vol. 300, Issue 3, pp. 149-57, (2012) (PubMed).

    Najafipour, Soltani Hekmat, Nekooian, Esmaeili-Mahani: "Apelin receptor expression in ischemic and non- ischemic kidneys and cardiovascular responses to apelin in chronic two-kidney-one-clip hypertension in rats." in: Regulatory peptides, Vol. 178, Issue 1-3, pp. 43-50, (2012) (PubMed).

    Fouad, Al-Mulhim, Jresat, Gomaa: "Therapeutic role of telmisartan against acetaminophen hepatotoxicity in mice." in: European journal of pharmacology, Vol. 693, Issue 1-3, pp. 64-71, (2012) (PubMed).

    Wang, Deb, Zhang, Sun, Liu, Yoon, Kong, Chen, Chang, Li: "Vitamin D receptor signaling in podocytes protects against diabetic nephropathy." in: Journal of the American Society of Nephrology : JASN, Vol. 23, Issue 12, pp. 1977-86, (2012) (PubMed).

  • Target Alle AGT ELISA Kits anzeigen
    AGT (Angiotensinogen (serpin Peptidase Inhibitor, Clade A, Member 8) (AGT))
    Andere Bezeichnung
    Angiotensin II, Angiotensinogen (AGT Produkte)
    Synonyme
    ANHU ELISA Kit, SERPINA8 ELISA Kit, AI265500 ELISA Kit, AngI ELISA Kit, AngII ELISA Kit, Aogen ELISA Kit, Serpina8 ELISA Kit, ANRT ELISA Kit, Ang ELISA Kit, PAT ELISA Kit, wu:fb62f06 ELISA Kit, wu:fj87b02 ELISA Kit, zgc:111892 ELISA Kit, AGT ELISA Kit, angt ELISA Kit, ANGT ELISA Kit, angiotensinogen ELISA Kit, angiotensinogen (serpin peptidase inhibitor, clade A, member 8) ELISA Kit, AGT ELISA Kit, Agt ELISA Kit, agt ELISA Kit
    Hintergrund
    Angiotensin II (ANGII), Angiotensin 2
    Gen-ID
    183
    UniProt
    P01019
    Pathways
    JAK-STAT Signalweg, ACE Inhibitor Pathway, EGFR Signaling Pathway, Peptide Hormone Metabolism, Regulation of Systemic Arterial Blood Pressure by Hormones, Regulation of Lipid Metabolism by PPARalpha, Protein targeting to Nucleus, Feeding Behaviour, Monocarboxylic Acid Catabolic Process, Dicarboxylic Acid Transport, Positive Regulation of Response to DNA Damage Stimulus, Regulation of long-term Neuronal Synaptic Plasticity
Sie sind hier:
Kundenservice