CXCL5 ELISA Kit (Chemokine (C-X-C Motif) Ligand 5)

Details for Product CXCL5 ELISA Kit No. ABIN625207, Anbieter: Anmelden zum Anzeigen
Antigen
  • CXCL5
  • ENA-78
  • SCYB5
  • AMCF-II
  • GCP-2
  • LIX
  • Scyb5
  • Scyb6
  • Cxcl6
  • chemokine (C-X-C motif) ligand 5
  • CXCL5
  • Cxcl5
Alternativen
Human CXCL5 ELISA Kit
Reaktivität
Ratte (Rattus)
Alternativen
Kits mit alternativen Reaktivitäten:
24
20
19
4
2
2
1
1
1
1
Methodentyp
Sandwich ELISA
Detektionsbereich
20-6000 pg/mL
Untere Nachweisgrenze
20 pg/mL
Applikation
ELISA
Optionen
Hersteller
Anmelden zum Anzeigen
Hersteller Produkt- Nr.
Anmelden zum Anzeigen
Verwendungszweck Rat LIX ELISA Kit for cell culture supernatants, plasma, and serum samples.
Proben Plasma, Cell Culture Supernatant, Serum
Analytische Methode Quantitative
Nachweismethode Colorimetric
Spezifität This ELISA kit shows no cross-reactivity with any of the cytokines tested: rat CINC-2, CINC-3, CNTF, Fractalkine, IL-1 alpha, IL-1 beta, IL-4, IL-6, IL-10, GM-CSF, IFN-gamma, Leptin, MCP-1, MIP-3 alpha, beta-NGF, TIMP-1, TNF-alpha, VEGF.
Sensitivität < 20 pg/mL
Produktmerkmale
  • Strip plates and additional reagents allow for use in multiple experiments
  • Quantitative protein detection
  • Establishes normal range
  • The best products for confirmation of antibody array data
Bestandteile
  • Pre-Coated 96-well Strip Microplate
  • Wash Buffer
  • Stop Solution
  • Assay Diluent(s)
  • Lyophilized Standard
  • Biotinylated Detection Antibody
  • Streptavidin-Conjugated HRP
  • TMB One-Step Substrate
Benötigtes Material
  • Distilled or deionized water
  • Precision pipettes to deliver 2 μL to 1 μL volumes
  • Adjustable 1-25 μL pipettes for reagent preparation
  • 100 μL and 1 liter graduated cylinders
  • Tubes to prepare standard and sample dilutions
  • Absorbent paper
  • Microplate reader capable of measuring absorbance at 450nm
  • Log-log graph paper or computer and software for ELISA data analysis
Andere Bezeichnung LIX / CXCL5 (CXCL5 ELISA Kit Abstract)
Hintergrund C-X-C motif chemokine 5 (Cytokine LIX) (Small-inducible cytokine B5)
Gen-ID 60665
UniProt P97885
Pathways Cellular Response to Molecule of Bacterial Origin, Regulation of Leukocyte Mediated Immunity
Applikationshinweise Recommended Dilution for serum and plasma samples3 fold
Probenmenge 100 μL
Plattentyp Pre-coated
Protokoll
  1. Prepare all reagents, samples and standards as instructed in the manual.
  2. Add 100 μL of standard or sample to each well.
  3. Incubate 2.5 h at RT or O/N at 4 °C.
  4. Add 100 μL of prepared biotin antibody to each well.
  5. Incubate 1 h at RT.
  6. Add 100 μL of prepared Streptavidin solution to each well.
  7. Incubate 45 min at RT.
  8. Add 100 μL of TMB One-Step Substrate Reagent to each well.
  9. Incubate 30 min at RT.
  10. Add 50 μL of Stop Solution to each well.
  11. Read at 450 nm immediately.
Aufbereitung der Reagenzien
  1. Bring all reagents and samples to room temperature (18 - 25 °C) before use.
    2. Sample dilution: If your samples need to be diluted, Assay Diluent A (Item D) should be used for dilution of serum/plasma samples. 1x Assay Diluent B (Item E) should be used for dilution of culture supernatants. Suggested dilution for normal serum/plasma: 3 fold. Please note that levels of the target protein may vary between different specimens. Optimal dilution factors for each sample must be determined by the investigator.
    3. Assay Diluent B should be diluted 5-fold with deionized or distilled water.
    4. Preparation of standard: Briefly spin the vial of Item C. Add 400 µL Assay Diluent A (for serum/plasma samples) or 1x Assay Diluent B (for cell culture medium) into Item C vial to prepare a 0.1 myg/mL standard. Dissolve the powder thoroughly by a gentle mix. Add 40 µL LIX standard from the vial of Item C, into a tube with 626.7 µL Assay Diluent A or 1x Assay Diluent B to prepare a 6000 pg/mL stock standard solution. Pipette 400 µL Assay Diluent A or 1x Assay Diluent B into each tube. Use the stock standard solution to produce a dilution series . Mix each tube thoroughly before the next transfer. Assay Diluent A or 1x Assay Diluent B serves as the zero standard (0 pg/mL). 200 µL 200 µL 200 µL 200 µL 200myl 40 µL standard +626.7 µL 6000 2000 666.7 222.2 74.07 24.69 0 pg/mL pg/mL pg/mL pg/mL pg/mL pg/mL pg/mL
    5. If the Wash Concentrate (20x) (Item B) contains visible crystals, warm to room temperature and mix gently until dissolved. Dilute 20 ml of Wash Buffer Concentrate into deionized or distilled water to yield 400 ml of 1x Wash Buffer.
    6. Briefly spin the Detection Antibody vial (Item F) before use. Add 100 µL of 1x Assay Diluent B into the vial to prepare a detection antibody concentrate. Pipette up and down to mix gently (the concentrate can be stored at 4 °C for 5 days). The detection antibody concentrate should be diluted 80-fold with 1x Assay Diluent B and used in step 4 of Part VI Assay Procedure.
    7. Briefly spin the HRP-Streptavidin concentrate vial (Item G) before use. HRP-Streptavidin concentrate should be diluted 400-fold with 1x Assay Diluent B. For example: Briefly spin the vial (Item G) and pipette up and down to mix gently . Add 30 µL of HRP-Streptavidin concentrate into a tube with 12 ml 1x Assay Diluent B to prepare a 400-fold diluted HRP- Streptavidin solution (don't store the diluted solution for next day use). Mix well.
Testdurchführung
  1. Bring all reagents and samples to room temperature (18 - 25 °C) before use. It is recommended that all standards and samples be run at least in duplicate.
    2. Add 100 µL of each standard (see Reagent Preparation step 2) and sample into appropriate wells. Cover well and incubate for 2.5 hours at room temperature or over night at 4 °C with gentle shaking.
    3. Discard the solution and wash 4 times with 1x Wash Solution. Wash by filling each well with Wash Buffer (300 myl) using a multi-channel Pipette or autowasher. Complete removal of liquid at each step is essential to good performance. After the last wash, remove any remaining Wash Buffer by aspirating or decanting. Invert the plate and blot it against clean paper towels.
    4. Add 100 µL of 1x prepared biotinylated antibody (Reagent Preparation step 6) to each well. Incubate for 1 hour at room temperature with gentle shaking.
    5. Discard the solution. Repeat the wash as in step
    6. Add 100 µL of prepared Streptavidin solution (see Reagent Preparation step 7) to each well. Incubate for 45 minutes at room temperature with gentle shaking.
    7. Discard the solution. Repeat the wash as in step
    8. Add 100 µL of TMB One-Step Substrate Reagent (Item H) to each well. Incubate for 30 minutes at room temperature in the dark with gentle shaking.
    9. Add 50 µL of Stop Solution (Item I) to each well. Read at 450 nm immediately.
Ergebnisberechnung

Calculate the mean absorbance for each set of duplicate standards, controls and samples, and subtract the average zero standard optical density. Plot the standard curve on log-log graph paper or using Sigma plot software, with standard concentration on the x-axis and absorbance on the y-axis. Draw the best-fit straight line through the standard points.
Typical Data: These standard curves are for demonstration only. A standard curve must be run with each assay. Assay Buffer A LIX concentration(pg/mL) O D =4 50 (n m ) 0.1 1 10 100 1,000 10,0000 Assay Buffer B LIX concentration(pg/mL) O D =4 50 (n m ) 0.01 0.1 1 10 100 1,000 10,0000
Sensitivity: The minimum detectable dose of LIX is typically less than 20 pg/mL.
Recovery: Recovery was determined by spiking various levels of rat LIX into rat serum, plasma and cell culture media. Mean recoveries are as follows: Sample Type Average % Recovery Range ( %) Serum 88.63 83-102 Plasma 89.45 84-103 Cell culture media 93.53 85-103
Linearity: Sample Type Serum Plasma Cell Culture Media 1:2 Average % of Expected 87 89 90 Range ( %) 83-103 82-102 87-103 1:4 Average % of Expected 90 94 93 Range ( %) 84-103 83-104 84-105
Reproducibility: Intra-Assay: CV<10 % Inter-Assay: CV<12 %

Testpräzision Intra-Assay: CV< 10 % Inter-Assay: CV< 12 %
Beschränkungen Nur für Forschungszwecke einsetzbar
Handhabung Avoid repeated freeze-thaw cycles.
Lagerung -20 °C
Informationen zur Lagerung The entire kit may be stored at -20°C for up to 1 year from the date of shipment. Avoid repeated freeze-thaw cycles. The kit may be stored at 4°C for up to 6 months. For extended storage, it is recommended to store at -80°C.
Haltbarkeit 6 months
Bilder des Herstellers
ELISA image for Chemokine (C-X-C Motif) Ligand 5 (CXCL5) ELISA Kit (ABIN625207) Chemokine (C-X-C Motif) Ligand 5 (CXCL5) ELISA Kit
Produkt verwendet in: Merabova, Kaminski, Krynska, Amini, Khalili, Darbinyan: "JCV agnoprotein-induced reduction in CXCL5/LIX secretion by oligodendrocytes is associated with activation of apoptotic signaling in neurons." in: Journal of cellular physiology, Vol. 227, Issue 8, pp. 3119-27, 2012 (PubMed).

Lee, Wang, Chan, Chen, Chang, Yang, Lee, Chang, Chen: "Electronegative low-density lipoprotein induces cardiomyocyte apoptosis indirectly through endothelial cell-released chemokines." in: Apoptosis : an international journal on programmed cell death, Vol. 17, Issue 9, pp. 1009-18, 2012 (PubMed).

Zlotnik, Yoshie: "Chemokines: a new classification system and their role in immunity." in: Immunity, Vol. 12, Issue 2, pp. 121-7, 2000

Allgemeine Veröffentlichungen Zlotnik, Yoshie: "Chemokines: a new classification system and their role in immunity." in: Immunity, Vol. 12, Issue 2, pp. 121-7, 2000 (PubMed).

Haben Sie etwas anderes gesucht?