Ataxin 10 ELISA Kit

Produktnummer ABIN5652057

Produktdetails Ataxin 10 ELISA Kit

Target: Ataxin 10 (ATXN10)

Reaktivität: Human

Nachweismethode: Colorimetric

Methodentyp: Sandwich ELISA

Detektionsbereich: 0.156 ng/mL - 10 ng/mL

Untere Nachweisgrenze: 0.156 ng/mL

Applikation: ELISA

Proben: Cell Lysate, Tissue Homogenate

Analytische Methode: Quantitative

Spezifität: This assay has high sensitivity and excellent specificity for detection of Ataxin 10 (ATXN10). No significant cross-reactivity or interference between Ataxin 10 (ATXN10) and analogues was observed.

Sensitivität: 0.055 ng/mL

Anwendungsinformationen

Kommentare:

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5 % within the expiration date under appropriate storage condition. To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Testdauer: 3 h

Plattentyp: Pre-coated

Protokoll: The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Ataxin 10 (ATXN10). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Ataxin 10 (ATXN10). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Ataxin 10 (ATXN10), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Ataxin 10 (ATXN10) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Testpräzision: Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Ataxin 10 (ATXN10) were tested 20 times on one plate, respectively
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Ataxin 10 (ATXN10) were tested on 3 different plates, 8 replicates in each plate. CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Beschränkungen: Nur für Forschungszwecke einsetzbar

Handhabung

Handhabung: The Stop Solution is acidic. Do not allow to contact skin or eyes. Calibrators, controls and specimen samples should be assayed in duplicate. Once the procedure has been started, all steps should be completed without interruption.

Lagerung: 4 °C,-20 °C

Informationen zur Lagerung: -20°C. Bring all reagents to room temperature before beginning test. The kit may be stored at 4°C for immediate use within two days upon arrival. Reseal any unused strips with desiccant pack. Minimize freeze/thaw cycles.

Haltbarkeit: 4-8 months

Details zu Ataxin 10

Target: Ataxin 10 (ATXN10)

Andere Bezeichnung: Ataxin 10 (ATXN10 Produkte)

Synonyme: ATXN10 ELISA Kit, MGC97716 ELISA Kit, atxn10 ELISA Kit, Ataxin-10 ELISA Kit, si:dkeyp-15g12.2 ELISA Kit, E46L ELISA Kit, HUMEEP ELISA Kit, SCA10 ELISA Kit, Sca10 ELISA Kit, AI325283 ELISA Kit, C77170 ELISA Kit, E46 ELISA Kit, TEG-169 ELISA Kit, Tex169 ELISA Kit, ataxin 10 ELISA Kit, ATXN10 ELISA Kit, atxn10 ELISA Kit, Atxn10 ELISA Kit

Hintergrund:

Gene Name: Ataxin 10

Gene Aliases: E46L, SCA10, Spinocerebellar Ataxia 10, Brain protein E46 homolog

Gen-ID: 25814

UniProt: Q9UBB4